please help...

[joecar]

Under CLC-00-003, there should be no blank line before VE (i.e. no blank line between the % line and the VE line).

Also, at end of file, there should be at least 2 blank lines (i.e. hit ENTER twice).

[Jayyk31]

Thanks i will correct those things! Much appreciated!

[Jayyk31]

Im editing this txt doc in V8 Explorer. Should i do it in 7.5? Cause i applied the changes and still nothing? Ive looked fo the txt doc in 7.5 and cant find it.

[joecar]

Edit the doc using Windows Notepad (or Notepad++ if you know how to get it).

Rename the doc to calc_pids.txt and move it to the folder C:\User\<you>\Documents\EFILive\V7.5\User Configuration

this doc defines calc pids for the V7 scantool.

[Jayyk31]

Joecar thanks a TON bro! I downloaded Notepad++ and followed exactly what u said to do and boom the 3 pid's were there in 7.5 scanner! Thanks for helping me and answering all my questions Joecar!!!

[joecar]

No worries

[Jayyk31]

For some reason now i get this error message now. Im doing "autoVE" and i made this filter and had no issues a few different times. I make another, different, filter and now for both i get this message. I didnt unselect any pid's or anything. Weird???

[joecar]

Post the file Filters.txt from the User Configuration folder.

Post your log file.


Are you logging the pids that the filter references...?

[Jayyk31]

Here's the Filters and my last log... I set ip up days ago and logged 3 previous sessions and the filter was good. As far as i can tell the correct pid's are check marked. I set it up exactly like the tutorial as far as I can tell. Yesterday I went in to set up a 2nd
seperate filter to filter out all 60% throttle and up and that's when it started... I'm sure i messed something up. The message i get doesn't tell me a pid to select. Thanks Joecar

[Jayyk31]

I got it. Not sure what happened? I ereased the new filter i made and included it into the original filter and its good now.