Results 1 to 8 of 8

Thread: Calc pid in V7.5

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    New Member
    Join Date
    Jun 2018
    Posts
    5

    Default Calc pid in V7.5

    I’m trying to create a calc pid for V7.5. Ive tried to create this using instructions from this site, it must be a bit beyond my IQ level. I’m trying to log lambda from an analog wideband. I’m currently logging AFR from this set up perfectly, just want to switch to lambda. I’m using analog input 1 and the formula needs to be: lambda=V*.096+.618. Can anyone help create this or point me in the right direction?
    Last edited by Jakemcnall; June 22nd, 2018 at 02:38 AM.

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Hi Jake,

    which wideband are you using...?


    here's an example calc_pids.txt that does the same thing as what you need, but for the AFR brand wideband:


    ( see CLC-00-041 )
    Attached Files Attached Files

  3. #3
    New Member
    Join Date
    Jun 2018
    Posts
    5

    Default

    Hi joecar,

    Thanks for the reply.

    I’m using a Ballenger AFR500V2

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by Jakemcnall View Post
    Hi joecar,

    Thanks for the reply.

    I’m using a Ballenger AFR500V2
    Do you have the user manual pdf for this...?

    Is this the same as the ECM AFR1500...?

    What is the stoich AFR that this wideband assumes...?

  5. #5
    New Member
    Join Date
    Jun 2018
    Posts
    5

  6. #6
    New Member
    Join Date
    Jun 2018
    Posts
    5

    Default

    I just nailed it.

    I was using expression: {EXT.AD1}*.096+.618

    Turns out I needed 0s in front of the decimals.

    Changed expression to: {EXT.AD1}*0.096+0.618

    Works like a champ now. Nothing quite like the feeling when you figure something out after messing with it for a long time. Thanks for the reply’s joecar.

  7. #7
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Good job


    that's a real nice wideband.

  8. #8
    New Member
    Join Date
    Jun 2018
    Posts
    5

    Default

    Thank you sir. It was recommended to me by my remote tuner

Similar Threads

  1. calc.pid /sae.generic - pid resoultion question
    By cyipher in forum Gen III V8 Specific
    Replies: 7
    Last Post: February 6th, 2014, 12:00 PM
  2. Can some help me with a calc pid please.
    By pavetim in forum Diesel
    Replies: 1
    Last Post: February 4th, 2011, 12:17 PM
  3. calc.pid help
    By mr.prick in forum General
    Replies: 11
    Last Post: June 1st, 2010, 01:28 AM
  4. e38 dma pid SCALEDCORVE_ doesnt work plus a bad calc pid
    By ringram in forum FlashScan V2 BB Logging
    Replies: 2
    Last Post: November 30th, 2008, 10:28 AM
  5. hp calc PID
    By pwilson22000 in forum General
    Replies: 3
    Last Post: July 24th, 2006, 11:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •