Results 1 to 2 of 2

Thread: E67 Oil Pressure and Temp

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. June 23rd, 2018 #1
    koolky
    koolky is offline
    Member koolky's Avatar
    Join Date
    Aug 2013
    Posts
    61

    Default E67 Oil Pressure and Temp

    Working with OS 12618164 2008 Trailbalzer 4.2L LL8 E67. Unfortunately my BIN extracting tools will read E38 but not E67’s.

    Looking for:

    The LL8 uses an oil pressure switch at J3 pin 65 which doesn’t report actual pressure. I’m hoping there is a switch in this OS to enable J2 pin 60 like the V8’s.

    Manual transmission option (like the E40) to allow DVT controls when running without the TCM since there are no matching OS’s with manual transmission to use for a segment swap.

    Engine Oil Temp - Switching G1218 from Calculated to Sensor works. J2 Pin 65. Logs fine with EFILive but won’t log with Torq app (GM PID 221154)
    Attached Files Attached Files
    Last edited by koolky; March 24th, 2019 at 09:37 AM. Reason: Missing info
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. E38 Oil Temp Sensor Input
    By kidturbo in forum Tips and tricks
    Replies: 27
    Last Post: September 22nd, 2021, 10:12 AM
  2. Engine Oil Temp on LS1B
    By CR500 in forum Gen III V8 Specific
    Replies: 10
    Last Post: September 16th, 2014, 07:19 PM
  3. Current Gear and Oil Temp
    By kwhiteside in forum FlashScan V2 BB Logging
    Replies: 8
    Last Post: June 21st, 2009, 08:28 AM
  4. Oil Temp Acceptable Range
    By bobbycollier in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 3
    Last Post: January 20th, 2009, 02:45 PM
  5. Reading oil pressure and fuel temp on a LBZ
    By Jasondt2001 in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 6
    Last Post: April 11th, 2008, 09:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules