Results 1 to 10 of 16

Thread: July 2018, Beta Update #2

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default July 2018, Beta Update #2

    ATTENTION - BETA SOFTWARE RELEASE
    We strongly recommend that you do not install the beta software over the top of your production systems. It is possible that the beta test software may fail and your production system may not be recoverable. lf you conduct a tuning business, please take the necessary precautions to protect your business. EFILive recommends beta testers use a separate FlashScan V2 device (when installing the latest beta firmware) and only install the EFILive beta test software on a separate PC, laptop or virtual machine.

    The current public release is available here.

    Release Notes:
    Version Numbers:
    After installing this beta release you should have the following software, boot block, firmware versions installed:

    • EFILive V7 software: V7.5.21 To view the installed version, select Help->About (in the V7 Scan or Tune software).
    • EFILive V8 software: V8.2.17 To view the installed version, select Help->About (in the V8 Scan and Tune software).
    • Boot Block: V2.07.008 (Jul 04, 2018) To view/update the Boot Block, click the [Check Firmware] button in the V8 Scan and Tune software.
    • Firmware: V2.07.134 (Jul 06, 2018) To view/update the Firmware, click the [Check Firmware] button in the V8 Scan and Tune software.


    Download here:
    Known Issues:
    Issue #1:
    If you are Black Box Logging PIDs from an ECM and TCM simultaneously and you have selected a PID from the transmission controller (TCM) that has an identically named PID in the engine controller (ECM), then when the log file is loaded back into the V8 software for viewing, that TCM PID will be displayed as if it originated from the ECM. The PID's data will have correctly been logged from the TCM, only its name will appear to indicate that it was logged from the ECM.
    Workaround:
    None.
    It is a restriction of the *.efi (V7.5 log file format). That restriction will be removed and the TCM PIDs will display their true origin once the V8 scan tool software is available and fully integrated with the V8 tuning tool software.

    Issue #2:
    When logging DMA PIDs (i.e. PIDs whose names end with "_M" or "_DMA"), if the ignition is switched off for an extended period while data logging but data logging is not terminated, then when the ignition is switched on again the data log automatically continues. However the DMA PIDs may no longer return valid data.
    Workaround:
    EFILive recommends stopping the data log and restarting the data log when switching off the ignition for extended periods.

    Issue #3:
    Adding a key to the [Remote] section of a tune file is only active for the following controllers: LS1B, E38, E40, E54, E60 and E67.
    Workaround:
    None.
    Support for additional controllers will be added in a future update.
    .
    Last edited by Blacky; August 2nd, 2018 at 04:16 PM.
    Before asking for help, please read this.

Similar Threads

  1. Beta Test Release #3 (Apr 2018)
    By Blacky in forum Software Updates and Installation Help
    Replies: 1
    Last Post: May 6th, 2018, 05:54 AM
  2. Beta Test Release #2 (Feb 2018)
    By Blacky in forum Software Updates and Installation Help
    Replies: 23
    Last Post: March 19th, 2018, 04:54 PM
  3. LML Table Update Jan 2018
    By cindy@efilive in forum Duramax 2011+ LML / LGH
    Replies: 22
    Last Post: March 1st, 2018, 12:59 PM
  4. Beta Test Release #1 (Feb 2018)
    By Blacky in forum Software Updates and Installation Help
    Replies: 29
    Last Post: February 12th, 2018, 05:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •