I have attached two screenshots. Both the Pid list and the about page
I have attached two screenshots. Both the Pid list and the about page
I'm assuming you're using a laptop...
Hook the interface up to the OBD2 port on your vehicle.
Turn the ignition key on, but don't start the engine.
Click File > Select Controller... Set the correct controller type for your vehicle.
Click the 'connect' icon in the scantool.
Validate your Pids.
Let us know if that helps at all.
Statesman: I did what you suggested, and the situation is unchanged.
There's something weird happening with either your software or your device. I looked back at your old posts and you had a similar problem tuning an E38. Try removing all the selected Pids from your list and then just select gm.maffreq and see if it validates when no other pids are selected.
statesman: I did what you suggested and it worked. I unchecked all the other pids except for GM.MAFFREQ and it validated it. What do I do next?
Okay, this is definitely a technical issue with your flashscan. You'll need to contact Efilive support and see if they can fix it for you.
Now try adding some of the other pids back, like SAE.VSS, SAE.TP, SAE.MAP, GM.MAF
and see what happens.
Could you please try re-validating the PIDs while connected to the vehicle/controller and once that is complete, select the menu option: File->Generate error report. Save that error report and email it to me at paul@efilive.com. Include a link to this thread so I know what it is about.
Regards
Paul
Before asking for help, please read this.
Blacky: Email sent