Results 1 to 3 of 3

Thread: Benifits of altering stock injector parameters

  1. #1
    Junior Member
    Join Date
    Apr 2018
    Posts
    26

    Default Benifits of altering stock injector parameters

    Hello all playing around with a stock 2005 lm7 and wondering what is the lowest you can set the stock injector minimum pwm and is there a benifit from it. Thanks

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Usually there is benefit from doing that only if you have swapped to bigger injectors.

  3. #3
    Lifetime Member
    Join Date
    Dec 2014
    Posts
    230

    Default

    This is not the setting you are thinking it is.... It is used for calculating not fuel consumption. I'd learn a bit how an injector works then revisit the question.

Similar Threads

  1. Altering Electronic Throttle Rates on E38
    By C6Guy in forum Gen IV V8 Specific
    Replies: 61
    Last Post: December 9th, 2012, 02:12 PM
  2. stock injector rated pressure
    By All-Star in forum Gen III V8 Specific
    Replies: 2
    Last Post: October 7th, 2009, 05:04 AM
  3. altering fuel
    By ALRAJHI in forum E37, E38 & E67 PFI ECM's
    Replies: 0
    Last Post: March 31st, 2009, 05:00 AM
  4. Having NO success altering WOT A/F after 85mm Lid/MAF
    By the Dragon in forum Gen III V8 Specific
    Replies: 6
    Last Post: December 3rd, 2007, 09:32 PM
  5. Is adjustment of LTFTs practical without altering MAF table?
    By JohnL in forum General (Petrol, Gas, Ethanol)
    Replies: 7
    Last Post: March 26th, 2005, 11:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •