Results 1 to 6 of 6

Thread: LS1b semi-closed loop operation question (B3647)

  1. #1
    Junior Member
    Join Date
    Aug 2012
    Posts
    22

    Default LS1b semi-closed loop operation question (B3647)

    EFILive has the LS1b has the B3647 Commanded Fuel/RPM,which when set to 14.63, will cause the ECU to go into a semi-closed loop state using the O2 sensors to keep idle and part throttle AFR @ 14.63.

    If I want my idle and part throttle set to 14.1, then my O2 sensors will be ignored. How does the ECU command the AFR when in this state since the O2s are ignored? By the VE table?

    Question: Is there a way to set B3647 to something like 14.1 and still have the O2 sensors ACTIVE?

  2. #2
    Senior Member
    Join Date
    Feb 2006
    Posts
    168

    Default

    Quote Originally Posted by RamAir View Post
    EFILive has the LS1b has the B3647 Commanded Fuel/RPM,which when set to 14.63, will cause the ECU to go into a semi-closed loop state using the O2 sensors to keep idle and part throttle AFR @ 14.63.

    If I want my idle and part throttle set to 14.1, then my O2 sensors will be ignored. How does the ECU command the AFR when in this state since the O2s are ignored? By the VE table? Yes, that is correct

    Question: Is there a way to set B3647 to something like 14.1 and still have the O2 sensors ACTIVE? No, even if you could then the O2 sensors would fight the 14.1 and move it back to stoich
    Rgds

    Jim
    2000 LS1 M6, No EGR/Air/PS/CATs. TR230 Cam, COS3, OLSD, LC1 Wideband fitted, Procharger P1SC, 2 Bar MAP, Siemans Dekka 60Lb Injectors.
    All wrapped up in a 2000Lb AC Cobra Replica

  3. #3
    Junior Member
    Join Date
    Aug 2012
    Posts
    22

    Default

    Ok - another question: why would you want to SFTF Idle Disable (B4108)? Don't you want SFTF since the O2s are giving feedback?

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by RamAir View Post
    Ok - another question: why would you want to SFTF Idle Disable (B4108)? Don't you want SFTF since the O2s are giving feedback?
    Yes, you do want.

  5. #5
    Junior Member
    Join Date
    Aug 2012
    Posts
    22

    Default

    That is what I thought, but in your documentation (pg 17 of COS using 2/3 bar) it indicates "several other STFT values may require adjustment:" {B4108} STFT Idle Disable. This value would either be on or off and your above statement indicates it should be on indicating I should not adjust. Confusing documentation.

  6. #6
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    You should try it both ways, just to see.

Similar Threads

  1. Turbo SD Closed Loop Operation Issues any ideas??
    By quik95lt1 in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 3
    Last Post: April 30th, 2014, 12:10 PM
  2. clarification on semi closed loop SD
    By Cablebandit in forum Custom Operating Systems
    Replies: 2
    Last Post: October 5th, 2009, 12:51 PM
  3. cos3 semi closed loop
    By kostelacd69 in forum Custom Operating Systems
    Replies: 35
    Last Post: September 11th, 2009, 07:49 AM
  4. Closed Loop Operation Questions
    By Kevin Doe in forum General (Petrol, Gas, Ethanol)
    Replies: 15
    Last Post: May 9th, 2008, 07:44 AM
  5. semi closed loop
    By 69camaro5speed in forum Custom Operating Systems
    Replies: 11
    Last Post: August 12th, 2007, 12:58 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •