Results 1 to 3 of 3

Thread: 411 Issues

  1. #1
    Lifetime Member HellKnightHicks's Avatar
    Join Date
    Mar 2011
    Posts
    268

    Default 411 Issues

    I installed a 411 some time ago in a 1997 chevy k1500

    Most everything works fine execpt the following.

    No Knock Sensor. Going to run new wire and new plug. Replaced knock sensor.

    PCM does not power off when key is off.

    I have to disconnect the battery and let it sit for 30 seconds. Then flash my calibration over.

    I know these issues are wiring because ive put the same PCM in a different truck and didnt have any issues with it.

    Any help would be appreciated.

  2. #2
    New Member
    Join Date
    Mar 2018
    Posts
    2

    Default

    I got a 99 Tahoe l31 doing a 411 ecm swap and I have ran in to a wire issue, wire is called vss output and it goes to the speedo in dash. my question is is the a diffence in my Tahoe vsss and a 2001 exprss van vss on how it talks or dose the 4x4 aspect effect the vss

  3. #3
    Lifetime Member HellKnightHicks's Avatar
    Join Date
    Mar 2011
    Posts
    268

    Default

    Quote Originally Posted by arc9262 View Post
    I got a 99 Tahoe l31 doing a 411 ecm swap and I have ran in to a wire issue, wire is called vss output and it goes to the speedo in dash. my question is is the a diffence in my Tahoe vsss and a 2001 exprss van vss on how it talks or dose the 4x4 aspect effect the vss
    Where did you get your working file?

    Lextech has spreadsheets to help conversion.

    I've done a 96 2wd and a 97 4wd and had no issues. Well speedo issues.

Similar Threads

  1. 96 to 411 pcm
    By tokymon in forum Vortec V6/V8 Specific
    Replies: 10
    Last Post: December 22nd, 2018, 12:11 PM
  2. 411 ecu with 98 Vette pedal tac and ls2 tbody issues
    By AllOutPerformance in forum Gen III V8 Specific
    Replies: 5
    Last Post: April 23rd, 2018, 08:33 AM
  3. 411 inquiry
    By rob_z71 in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: January 4th, 2017, 08:46 AM
  4. 411 swap did not go well
    By FeetDry in forum Gen III V8 Specific
    Replies: 51
    Last Post: June 9th, 2011, 03:50 AM
  5. 411 PCM's
    By joecar in forum Lounge
    Replies: 4
    Last Post: June 4th, 2007, 10:07 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •