Flashscan V2 no device connected

[4x4 Nut]

Hello, I'm trying to flash a GM diesel with my V2 using EFI Live V8. I don't use it often & last time was this past February (without problems). When I connected it today I first checked for & installed updates just fine. I then tried to check firmware & get the following error message.

No FlashScan device connected.
Please connect a FlashScan USB device.
If a FlashScan device is connected, ensure it is not being used by another application such as the EFILive V7.5 Scan or Tune Software.

In searching the forums I came across one similar to my situation & one post got my attention (post #14).
https://forum.efilive.com/showthread...-connect/page2
My device though has a back-lit screen, but no text (blank screen). This is while it is connected to the laptop, but once the OBD2 is connected to the vehicle, the text & options appear. I can't say this for sure as I wasn't expecting problems & not paying attention, but I thought I had text on the screen when I first connected to the laptop & before running updates. I may be wrong on that though.

I found something else in the forums saying install USB via the USB Driver Manager. When I tried to do so it wouldn't work because I have Windows XP yet (yes, I know it's old & dated, but it has still been working for me). I then tried to load the program on a newer laptop I have with Windows 8.1 Pro on it. When I went to install I was given this error message.

This app can't run on your PC
To find a version for your PC, check with the software publisher.

Any help would be appreciated. I have to admit, I'm not very knowledgeable on computers (especially Windows) so I may have to ask dumb questions. Thanks in advance though.

[joecar]

The Win-XP driver is located here: C:\Program Files (x86)\EFILive\Drivers\EFILive\Win-XP-Vista-7



Try unplugging USB cable, wait a few seconds, replug USB cable back in.

[4x4 Nut]

I found my way into the Win-XP-Vista-7 folder. Is there supposed to be anything in there titled Win-XP? I don't have if so. I have 3 folders, 2 security catalogs, 2 set-up info, & 1 H file.

I've tried multiple times to uplug & reconnect the USB cable. All with no luck. When I connect the device/ cable I get an unusual sound. Hopefully this description makes sense- If the typical sound is dong-ding when you connect a device & ding-dong when unplugging, the noise I get when connecting the V2 is 3 QUICK dongs. Unplugging is the normal ding-dong.

[statesman]

Try the procedure on this webpage...

https://us.answers.acer.com/app/answ...-windows-xp%3F

It's an Acer webpage, but this procedure will work on any XP machine.

[4x4 Nut]

The guys at SoCal Diesel got it figured out for me. It was some sort of USB Driver issue with the FlashScan. Working now. Thanks for the help.

[4x4 Nut]

Thanks for your help. Just did the procedure & it did find new hardware at start up. V2 works the same way after the restart though.