Results 1 to 2 of 2

Thread: Tune a bit for 1/4mi ?

  1. #1
    Lifetime Member Garry's Avatar
    Join Date
    Jun 2006
    Posts
    649

    Question Tune a bit for 1/4mi ?

    If I luck out, I might finally get my car registered before the weekend and my take it to a track/airport to get a couple of quartermile runs in. I will be doing some blackbox logging, but as the car is stock, and the WBO2 isn't here yet, how much good will it do? Can I do anything worth the effort (read: .1/.2+ improvement) as it is right now?

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Without a WBO2, you could try to get your WOT NBO2 voltages into the range 930-950mV; not as accurate as a WBO2, but better than nothing.

Similar Threads

  1. Replies: 5
    Last Post: August 5th, 2008, 02:35 PM
  2. Tune VE and MAF tables or leave VE stock and tune MAF only
    By BlackGMC in forum Gen III V8 Specific
    Replies: 2
    Last Post: August 4th, 2008, 08:05 PM
  3. What else can I tune without scanning or black boxen it? Tune history inside.
    By Round Rock TJ in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: May 3rd, 2007, 02:27 AM
  4. Convince me to change to a 2bar tune...709rwhp through an EFI maf tune.
    By onfire in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 7
    Last Post: June 16th, 2006, 12:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •