Results 1 to 7 of 7

Thread: V2 Goes Blank When I Load A SD Card

  1. #1
    Junior Member
    Join Date
    Jul 2018
    Posts
    27

    Default V2 Goes Blank When I Load A SD Card

    Hi , Im following the tutorial on installing a SD card but the V2 Unit Looses power On lcd screen and I loose
    communication . If I remove the sd card it will power back up . SD card im using is 16gb verbatim

  2. #2
    Junior Member
    Join Date
    Jul 2018
    Posts
    27

    Default

    All sorted , the sd card I purchased was not compatible, replaced all good

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Thanks for posting.

  4. #4
    New Member
    Join Date
    Aug 2018
    Posts
    1

    Default

    Just out of curiosity, what was the SD card that's compatible btw? I plan on buying a new SD card as well.
    I strongly suggest these fat burners for men because they worked for me.

  5. #5
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    I don't know what SD card Mr teabags used.



    ( I know SanDisk is ok )

  6. #6
    Lifetime Member
    Join Date
    Nov 2005
    Posts
    1,753

    Default

    Supported SD Card formats, and SD card configuration instructions are documented here.

    https://support.efilive.com/kb_artic...6425-AKLC-5907

    Cheers
    Cindy

  7. #7
    Junior Member
    Join Date
    Jul 2018
    Posts
    27

    Default

    Sorry guys the sandisk 16gb memory card works well

Similar Threads

  1. V2 blank screen
    By CDR in forum FlashScan V2
    Replies: 3
    Last Post: December 1st, 2017, 07:12 AM
  2. Is this PCM blank? E40
    By limited cv8r in forum General (Petrol, Gas, Ethanol)
    Replies: 9
    Last Post: May 10th, 2015, 12:45 AM
  3. Gauge cluster goes blank.
    By samgm2 in forum FlashScan V2
    Replies: 10
    Last Post: July 16th, 2011, 10:27 AM
  4. Blank 12200411 PCM
    By joecar in forum Gen III V8 Specific
    Replies: 23
    Last Post: May 7th, 2007, 07:39 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •