Page 1 of 5 123 ... LastLast
Results 1 to 10 of 44

Thread: $06FF on an E38, no start and stuck in my driveway

  1. #1
    Lifetime Member LBZoom's Avatar
    Join Date
    Jun 2008
    Posts
    452

    Default $06FF on an E38, no start and stuck in my driveway

    Hey guys,
    I've seen other users with this issue, had to have a file "fixed" looks like? Or maybe someone has a clean stock file that matches I can try?

    Stock File attachedJames Sharp Stock.ctz
    Peace Through Torque

    Punisher Performance DSP5 Tuning, PPE Dual CP3's, 68mm Fleece Cheetah, Punisher Built trans w/ Suncoast Parts, Airdog 165, SoCal 100% Overs, ARP Studs

    2013 NHRDA Sportsman World Champion

    www.PunisherPerformance.com

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    There is nothing wrong with this file that would cause this. I think there was a beta version that had this happen on some occasions.
    Just try install software (and update firmware) from this beta 4.
    https://forum.efilive.com/showthread...-Beta-Update-4

    Cheers,
    Ross
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    New Member
    Join Date
    Feb 2019
    Posts
    9

    Default

    Hello Ross,

    I too am experiencing this issue code. I have attempted numerous times to upload a factory OEM tune and as well as an 87 Flex fuel & 91 flex fuel tune. My first attempt at uploading the 91FF tune sent my car into a lock out mode and that $06FF Code. Any and all assistance would be greatly appreciated. I have a 2012 CTS V6 AWD.

    -Lorenzo

  4. #4
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    You'll have to post your tune up here please and I can take a look.
    I no longer monitor the forum, please either post your question or create a support ticket.

  5. #5
    New Member
    Join Date
    Feb 2019
    Posts
    9

    Default

    Unable to load file. Coz file.

  6. #6
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Ok, just make more posts (I think 5 is the minimum before you can put attachments up), post any text to get the post count up then you should be ok.
    So a .coz file is just the calibrations, do you have the full .ctz instead?
    If this file is locked to a tuners Flashscan then you will have to get them to contact us as we can't unlock the file, they will need to send us your stock tune.
    I no longer monitor the forum, please either post your question or create a support ticket.

  7. #7
    New Member
    Join Date
    Feb 2019
    Posts
    9

    Default

    Okay

  8. #8
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Is it your own tune or were you sold a tune from someone else?
    I no longer monitor the forum, please either post your question or create a support ticket.

  9. #9
    New Member
    Join Date
    Feb 2019
    Posts
    9

    Default

    I purchased multiple tunes from Will at Overkill. An 87 Flex fuel, 91 Flex fuel, 93 Flex fuel, and transmission tunes. As well as their 80mm TB.

  10. #10
    New Member
    Join Date
    Feb 2019
    Posts
    9

    Default

    Now I’m gettin’ this code.

Page 1 of 5 123 ... LastLast

Similar Threads

  1. E38 checksum $06FF now no data
    By 07 LBZ in forum Petrol / Gas
    Replies: 1
    Last Post: February 20th, 2018, 08:41 AM
  2. Error $06FF E38 Dead G8
    By LllL837 in forum AutoCal
    Replies: 7
    Last Post: June 29th, 2017, 11:55 AM
  3. 2010 camaro E38 $06ff-
    By rubbersidedown in forum E37, E38 & E67 PFI ECM's
    Replies: 2
    Last Post: June 8th, 2016, 09:10 AM
  4. $06ff error on E38
    By Y BE AVG in forum AutoCal
    Replies: 6
    Last Post: November 5th, 2013, 10:31 AM
  5. V2 stuck on start up screen after update
    By floriduramax1 in forum FlashScan V2
    Replies: 6
    Last Post: July 14th, 2007, 03:01 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •