Results 1 to 4 of 4

Thread: RMA case

  1. #1
    Lifetime Member hymey's Avatar
    Join Date
    Jan 2008
    Posts
    299

    Default RMA case

    I have some issues with my flashscan with the USB port.I want to send back for repairs. I have been asked to create a RMA case. I have asked support how to and no reply. I have done some searches on the support page and the forum and I haven't found anything. ?

  2. #2
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    12,780

    Default

    Hymey, is it just a dodgy fitting connector? They are standard USB sockets, pretty easy to change for anyone who knows the hot end of a soldering iron from the cold end.
    If the unit is still in warranty that is a different story but I think you'll find if it isn't it'll be easier to have a local electronics shop repair it for you than send it back to NZ. Also, the repairs in NZ are not done in house, they are sent back to the manufacturer (still in NZ) so there could be some additional delays and expense if it is out of warranty.
    Need official EFILive help, please go here.
    For tuning support please post your questions on this forum (or other auto forums).
    Sorry if I don't respond to your PM, don't take it personal.


  3. #3
    Lifetime Member hymey's Avatar
    Join Date
    Jan 2008
    Posts
    299

    Default

    Thanks, my apologies it's the opposite end of the tool. The RJ45 female. And also require a new cable. I'd do it myself but I don't have the time atm.

  4. #4
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    12,780

    Default

    I'll send you a PM.
    Need official EFILive help, please go here.
    For tuning support please post your questions on this forum (or other auto forums).
    Sorry if I don't respond to your PM, don't take it personal.


Similar Threads

  1. 4.2 I6 Case
    By Tinbender59 in forum Petrol / Gas
    Replies: 2
    Last Post: January 17th, 2015, 02:51 PM
  2. CASE not getting copied into RR
    By Highlander in forum RoadRunner Real-Time PCM Emulator
    Replies: 2
    Last Post: September 17th, 2012, 02:14 AM
  3. CASE Learn on a RR?
    By N0DIH in forum RoadRunner Real-Time PCM Emulator
    Replies: 39
    Last Post: August 1st, 2009, 01:37 AM
  4. case relearn
    By 67LS3 in forum Gen IV V8 Specific
    Replies: 1
    Last Post: October 23rd, 2008, 01:52 PM
  5. V2 storage case
    By GAMEOVER in forum FlashScan V2
    Replies: 0
    Last Post: September 24th, 2008, 07:56 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •