Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 22

Thread: 97 c3500HD 454

  1. #11
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Quote Originally Posted by malibu795 View Post
    Same ecm
    Sorry malibu795 they aren't the same ECM's, the 96-97 had one type, then it changed again for 98-00 (the one we supported but have since retired active work on).
    I no longer monitor the forum, please either post your question or create a support ticket.

  2. #12
    Junior Member
    Join Date
    Dec 2007
    Posts
    25

    Default

    Quote Originally Posted by GMPX View Post
    Sorry malibu795 they aren't the same ECM's, the 96-97 had one type, then it changed again for 98-00 (the one we supported but have since retired active work on).
    Can it still have the 411 swap done?

  3. #13
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    I don't know sorry, I'm not sure what is actually involved in that process.
    I no longer monitor the forum, please either post your question or create a support ticket.

  4. #14
    Lifetime Member SS2win's Avatar
    Join Date
    Feb 2005
    Posts
    373

    Default

    yes it can. Lextech has the spreadsheet for it. I've done a 97 and a 99.
    2001 Camaro SS
    EFILive Custom OS3

  5. #15
    Junior Member
    Join Date
    Dec 2007
    Posts
    25

    Default

    Already Sent him a PM..

  6. #16
    Junior Member
    Join Date
    Dec 2007
    Posts
    25

    Default

    been going through it... been getting lean burn codes on the O2 and 1406, above 1/2 throttle engine tends to lay over on power dragging a 7k trailer and gets more noticeable the heavier I get...
    cant get the fuel system lined out... new filter/fuel pump w/sock/injectors..
    all data has 56-62psi for specs
    key on fuel pressure 46psi
    key off fuel pressure drops almost instantly to 15-20psi
    free rev drops to 40psi from 46psi
    all pressures measured at test port.
    putting a 340LPH pump in the tank will probably mask the problem due to shear volume of fuel sent..
    picked up adapter to swap line to -6 AN to run from tank to engine for supply and return incase one of the steel to hose transitions pealed over and is restricting flow..
    fuel pressure regulator is vacuum controlled
    both FPR and fuel pump are under 12M warranty...getting new FPR tomorrow
    could I have a gotten a bad fuel pump?
    have exhaust (dual 3" ) and 0411 ECM waiting to go one... get one problem fixed at a time...

  7. #17
    Junior Member
    Join Date
    Dec 2007
    Posts
    25

    Default

    Here's some stuff I do with it.. grossed 25k
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_20181002_144421252.jpg 
Views:	194 
Size:	648.8 KB 
ID:	22497  

  8. #18
    Junior Member
    Join Date
    Dec 2007
    Posts
    25

    Default

    upon further parts review.. fuel pump I got is rated at 35GPH and 85psi swapping it out got the 58gph/110psi version

  9. #19
    Junior Member
    Join Date
    Dec 2007
    Posts
    25

    Default

    Swapped fuel pump hits 62psi with key on then drops to 58psi, used the bigger pump I mentioned

  10. #20
    Junior Member
    Join Date
    Dec 2007
    Posts
    25

    Default

    after multiple attempts... engine had no power... yanked the MPFI system off, put a MSD 6AL with blaster SS coil billet dis, edelbrock performer intake, fast ezi efi 1.0, oem fuel pump.. also swap to adjustable valve train with 1.7 roller tip rockers. comp cam conversion stud is #4514-16 ~$90.00 since I already did the 0411 swap ill turn all the SES codes off..

Page 2 of 3 FirstFirst 123 LastLast

Similar Threads

  1. 454 411 Swap
    By Supercharged111 in forum General (Petrol, Gas, Ethanol)
    Replies: 115
    Last Post: June 26th, 2019, 03:17 PM
  2. Vortec 454 swap
    By blazinblue in forum Vortec V6/V8 Specific
    Replies: 5
    Last Post: April 16th, 2012, 02:23 PM
  3. 454 Wont start.
    By notgoodenugh in forum Vortec V6/V8 Specific
    Replies: 1
    Last Post: February 4th, 2012, 11:30 AM
  4. 2000 1ton 454 help
    By mytoyz in forum Tuning For Economy
    Replies: 0
    Last Post: April 1st, 2011, 10:49 AM
  5. 98 Vortec 454
    By knagel in forum Vortec V6/V8 Specific
    Replies: 0
    Last Post: October 7th, 2008, 01:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •