I have some white smoke at startup so I was playing with increasing my rail pressure and on this tune I set idle to a flat 70MPa. I noticed this strange ramping of the desired rail pressure. The ramp appears to be a constant slope at about 2.5MPa/S. I was wondering if anyone has ever run into this or knows if there is a way to increase the slope of this ramp.
Click image for larger version. 

Name:	Capture.PNG 
Views:	80 
Size:	84.4 KB 
ID:	22435

log in picture: CMB_0141.efi

stock: CMB_0140.efi