Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: Unable to Edit Trans Diag, Fuel Sys, System, Speedo

  1. #11
    Lifetime Member
    Join Date
    Mar 2009
    Posts
    746

    Default

    I swapped in all the .calz files for the entire LS1B folder from a newer 7.5 and voila, all my system stuff is there again. Just had to dig up an old HDD, run it as a slave, and wade through all the stuff I never carried over to the new one. As you may have guessed I put that off for a good while.
    1998 GMC Sierra K1500 5.7/4L80E, longtubes, 411 w/COS 5, marine cam/intake, Whipple. 91 octane at 6000'.
    1997 GMC Sierra K3500 7.4/4L80E, 411 w/COS 3, Whipple, small cam.
    2004 Corvette Z06 with longtubes.

  2. #12
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Good job

  3. #13
    New Member Kacey's Avatar
    Join Date
    May 2019
    Posts
    1

    Default

    Not sure what the issue could be but I see all segments when I open the file - latest public release.
    Let's get joker slot
 right now here

Page 2 of 2 FirstFirst 12

Similar Threads

  1. How do I properly setup the speedo for a manual trans E67?
    By 04colyZQ8 in forum E37, E38 & E67 PFI ECM's
    Replies: 0
    Last Post: January 15th, 2017, 10:05 AM
  2. Returnless fuel system
    By sparkinak in forum Gen III V8 Specific
    Replies: 3
    Last Post: August 17th, 2016, 06:32 AM
  3. problem system to lean '02 Trans Am
    By gcross in forum Gen III V8 Specific
    Replies: 0
    Last Post: May 31st, 2009, 08:47 AM
  4. 98 to 99+ fuel system segment swap.
    By waterbug1999 in forum Gen III V8 Specific
    Replies: 25
    Last Post: October 8th, 2008, 08:21 AM
  5. Question on Fuel System
    By Randy07GMAX in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 7
    Last Post: June 17th, 2008, 05:13 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •