Page 1 of 3 123 LastLast
Results 1 to 10 of 24

Thread: Current Public Release (Oct 2018)

  1. #1
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,120

    Default Current Public Release (Oct 2018)

    Release Notes:
    Version Numbers:
    After installing this beta release you should have the following software, boot block, firmware versions installed:

    • EFILive V7 software: V7.5.25 To view the installed version, select Help->About (in the V7 Scan or Tune software).
    • EFILive V8 software: V8.2.21 To view the installed version, select Help->About (in the V8 Scan and Tune software).
    • Boot Block: V2.07.008 (Jul 4, 2018) To view/update the Boot Block, click the [Check Firmware] button in the V8 Scan and Tune software.
    • Firmware: V2.07.138 (Oct 25, 2018) To view/update the Firmware, click the [Check Firmware] button in the V8 Scan and Tune software.


    Download here:
    Known Issues:
    Issue #1:
    If you are Black Box Logging PIDs from an ECM and TCM simultaneously and you have selected a PID from the transmission controller (TCM) that has an identically named PID in the engine controller (ECM), then when the log file is loaded back into the V8 software for viewing, that TCM PID will be displayed as if it originated from the ECM. The PID's data will have correctly been logged from the TCM, only its name will appear to indicate that it was logged from the ECM.
    Workaround:
    None.
    It is a restriction of the *.efi (V7.5 log file format). That restriction will be removed and the TCM PIDs will display their true origin once the V8 scan tool software is available and fully integrated with the V8 tuning tool software.

    Issue #2:
    When logging DMA PIDs (i.e. PIDs whose names end with "_M" or "_DMA"), if the ignition is switched off for an extended period while data logging but data logging is not terminated, then when the ignition is switched on again the data log automatically continues. However the DMA PIDs may no longer return valid data.
    Workaround:
    EFILive recommends stopping the data log and restarting the data log when switching off the ignition for extended periods.

    .
    Last edited by Blacky; January 23rd, 2019 at 02:49 PM.
    Before asking for help, please read this.

  2. #2
    Lifetime Member Road's Avatar
    Join Date
    Feb 2015
    Posts
    306

    Default

    While greatly appreciate the few 2018 csp operating systems that have been added but are you going to add in 2016 and 2017 OS that have been over looked?

  3. #3
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    12,782

    Default

    Hi Mike, there should be 2016 & 2017 in there too, I can see the .calz files:

    52160202 (original 32160202)
    52170403 (original 32170403)
    52170404 (original 32170404)

    Cheers,
    Ross
    Need official EFILive help, please go here.
    For tuning support please post your questions on this forum (or other auto forums).
    Sorry if I don't respond to your PM, don't take it personal.


  4. #4
    Lifetime Member ProperTuningOG's Avatar
    Join Date
    Dec 2014
    Posts
    218

    Default

    Getting this now on windows 10. Tried running as admin

    Click image for larger version. 

Name:	Capture.JPG 
Views:	89 
Size:	100.9 KB 
ID:	22498

  5. #5
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,120

    Default

    Quote Originally Posted by Team208Motorsports View Post
    Getting this now on windows 10. Tried running as admin

    Click image for larger version. 

Name:	Capture.JPG 
Views:	89 
Size:	100.9 KB 
ID:	22498

    You need to give Windows 10 permission to write/update files in the C:\Program Files (x86)\EFILive\V7.5\Configuration folder. To do that:


    1. Open Windows Explorer.
    2. Navigate to C:\Program Files (x86)\EFILive\V7.5\Configuration.
    3. Right click on the "Configuration" folder name and select "Properties".
    4. Select the [Security] tab page.
    5. Click on the [Edit] button.
    6. Click the [Add] button.
    7. Type in your Windows username (if you don't know your Windows user name, click [Advanced], then [Find now] and select your username from the list and click [OK]).
    8. Click [Check Names] to make sure the name you entered is valid (it may change to prefix your computer name to the username).
    9. Click [OK].
    10. Make sure the newly added username is selected in the list and check/activate the "Full control/Allow" check box.
    11. Click [OK].
    12. Click [OK].


    Regards
    Paul
    Before asking for help, please read this.

  6. #6
    Lifetime Member ProperTuningOG's Avatar
    Join Date
    Dec 2014
    Posts
    218

    Default

    Thanks!!!

  7. #7
    Junior Member
    Join Date
    Apr 2008
    Posts
    48

    Default

    V7.5 & V8 unusable after this update. Tried above instructions, did not help. Tried uninstalling and deleting program files and then fresh install. This did not help either still getting same errors. Cant close program endless errors keep popping up.

    Click image for larger version. 

Name:	Capture.JPG 
Views:	58 
Size:	148.6 KB 
ID:	22510Click image for larger version. 

Name:	Capture.2JPG.JPG 
Views:	42 
Size:	103.0 KB 
ID:	22511

  8. #8
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,120

    Default

    For V7.5 issues:

    To completely reset V7.5 to factory/install defaults, close all EFILive V7.5 software, uninstall, run "regedit" and remove the entire V7 registry hive from here: Computer\HKEY_CURRENT_USER\Software\EFILive\V7.5 then re-install.
    You could try modifying the V7 Tune Tool desktop icon (right click and select properties) so that the "Target" field has a " /l" at the end. (that's space, forward slash, lower-case L, without the quotes).
    Then run the tune tool "as administrator" by right clicking on the icon and selecting "Run as Administrator", that will create a StartupLog.txt file in the \Program Files (x86)\EFILive\V7.5 folder.
    like this:
    Click image for larger version. 

Name:	v7Trace.png 
Views:	49 
Size:	76.1 KB 
ID:	22513
    Try looking in that trace file to see if it shows any issues.

    -----------------------------------------------------
    For V8 issues:

    To completely reset V8 to factory/install defaults, close all EFILive V8 software, uninstall, delete the V8 install folder: \Program Files (x86)\EFILive\V8
    and delete the three files:
    Documents\EFILive\V8\Config\EFILiveScanAndTuneLayo ut.ini
    Documents\EFILive\V8\Config\EFILiveHapi.ini
    Documents\EFILive\V8\Config\EFILiveScanAndTune.ini

    Try starting the V8 software by double-clicking on the V8 Scan and Tune desktop icon while holding down the Ctrl key on the PC keyboard. That will create startup log file(s) in the folder: \Documents\EFILive\V8\Trace called
    EFILive_ScanAndTune_StartupLog.txt
    EFILive_Hapi_StartupLog.txt
    Try looking in those trace files to see if they show any issues.

    If those options don't help, please create a support ticket, as per these instructions: https://support.efilive.com/kb_artic...7778-QEKN-0400

    Regards
    Paul
    Before asking for help, please read this.

  9. #9
    Junior Member
    Join Date
    Apr 2008
    Posts
    48

    Default

    Quote Originally Posted by Blacky View Post
    For V7.5 issues:

    To completely reset V7.5 to factory/install defaults, close all EFILive V7.5 software, uninstall, run "regedit" and remove the entire V7 registry hive from here: Computer\HKEY_CURRENT_USER\Software\EFILive\V7.5 then re-install.
    You could try modifying the V7 Tune Tool desktop icon (right click and select properties) so that the "Target" field has a " /l" at the end. (that's space, forward slash, lower-case L, without the quotes).
    Then run the tune tool "as administrator" by right clicking on the icon and selecting "Run as Administrator", that will create a StartupLog.txt file in the \Program Files (x86)\EFILive\V7.5 folder.
    like this:
    Click image for larger version. 

Name:	v7Trace.png 
Views:	49 
Size:	76.1 KB 
ID:	22513
    Try looking in that trace file to see if it shows any issues.

    -----------------------------------------------------
    For V8 issues:

    To completely reset V8 to factory/install defaults, close all EFILive V8 software, uninstall, delete the V8 install folder: \Program Files (x86)\EFILive\V8
    and delete the three files:
    Documents\EFILive\V8\Config\EFILiveScanAndTuneLayo ut.ini
    Documents\EFILive\V8\Config\EFILiveHapi.ini
    Documents\EFILive\V8\Config\EFILiveScanAndTune.ini

    Try starting the V8 software by double-clicking on the V8 Scan and Tune desktop icon while holding down the Ctrl key on the PC keyboard. That will create startup log file(s) in the folder: \Documents\EFILive\V8\Trace called
    EFILive_ScanAndTune_StartupLog.txt
    EFILive_Hapi_StartupLog.txt
    Try looking in those trace files to see if they show any issues.

    If those options don't help, please create a support ticket, as per these instructions: https://support.efilive.com/kb_artic...7778-QEKN-0400

    Regards
    Paul
    Thanks for the tips but unfortunately that did not work. Will be creating a support ticket

  10. #10
    Junior Member
    Join Date
    Apr 2008
    Posts
    48

    Default

    Sorry it was a computer issue. Tried to use anther tuning software and it was having errors as well. Just use that laptop for tuning so I did a reset and all is working well now. Not sure what the issue was just easier to reset and start over. Thanks for your quick response though.


    Sent from my iPhone using Tapatalk

Page 1 of 3 123 LastLast

Similar Threads

  1. Current Public Release (Sep 2018)
    By Blacky in forum Software Updates and Installation Help
    Replies: 9
    Last Post: October 30th, 2018, 02:59 AM
  2. Current Public Release (May 2018)
    By Blacky in forum Software Updates and Installation Help
    Replies: 26
    Last Post: July 5th, 2018, 10:36 AM
  3. Public Release (Updated Oct 31, 2017)
    By Blacky in forum Software Updates and Installation Help
    Replies: 6
    Last Post: November 1st, 2017, 08:30 AM
  4. Current Public Release (Oct 2017)
    By Blacky in forum Software Updates and Installation Help
    Replies: 3
    Last Post: October 25th, 2017, 03:55 PM
  5. Oct 2017, Release Candidate 4 (AKA Public Release)
    By Blacky in forum Software Updates and Installation Help
    Replies: 11
    Last Post: October 23rd, 2017, 08:17 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •