Results 1 to 10 of 24

Thread: Current Public Release (Oct 2018)

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default Current Public Release (Oct 2018)

    Release Notes:
    Version Numbers:
    After installing this beta release you should have the following software, boot block, firmware versions installed:

    • EFILive V7 software: V7.5.25 To view the installed version, select Help->About (in the V7 Scan or Tune software).
    • EFILive V8 software: V8.2.21 To view the installed version, select Help->About (in the V8 Scan and Tune software).
    • Boot Block: V2.07.008 (Jul 4, 2018) To view/update the Boot Block, click the [Check Firmware] button in the V8 Scan and Tune software.
    • Firmware: V2.07.138 (Oct 25, 2018) To view/update the Firmware, click the [Check Firmware] button in the V8 Scan and Tune software.


    Download here:
    Known Issues:
    Issue #1:
    If you are Black Box Logging PIDs from an ECM and TCM simultaneously and you have selected a PID from the transmission controller (TCM) that has an identically named PID in the engine controller (ECM), then when the log file is loaded back into the V8 software for viewing, that TCM PID will be displayed as if it originated from the ECM. The PID's data will have correctly been logged from the TCM, only its name will appear to indicate that it was logged from the ECM.
    Workaround:
    None.
    It is a restriction of the *.efi (V7.5 log file format). That restriction will be removed and the TCM PIDs will display their true origin once the V8 scan tool software is available and fully integrated with the V8 tuning tool software.

    Issue #2:
    When logging DMA PIDs (i.e. PIDs whose names end with "_M" or "_DMA"), if the ignition is switched off for an extended period while data logging but data logging is not terminated, then when the ignition is switched on again the data log automatically continues. However the DMA PIDs may no longer return valid data.
    Workaround:
    EFILive recommends stopping the data log and restarting the data log when switching off the ignition for extended periods.

    .
    Last edited by Blacky; January 23rd, 2019 at 02:49 PM.
    Before asking for help, please read this.

Similar Threads

  1. Current Public Release (Sep 2018)
    By Blacky in forum Software Updates and Installation Help
    Replies: 9
    Last Post: October 30th, 2018, 02:59 AM
  2. Current Public Release (May 2018)
    By Blacky in forum Software Updates and Installation Help
    Replies: 26
    Last Post: July 5th, 2018, 10:36 AM
  3. Public Release (Updated Oct 31, 2017)
    By Blacky in forum Software Updates and Installation Help
    Replies: 6
    Last Post: November 1st, 2017, 08:30 AM
  4. Current Public Release (Oct 2017)
    By Blacky in forum Software Updates and Installation Help
    Replies: 3
    Last Post: October 25th, 2017, 03:55 PM
  5. Oct 2017, Release Candidate 4 (AKA Public Release)
    By Blacky in forum Software Updates and Installation Help
    Replies: 11
    Last Post: October 23rd, 2017, 08:17 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •