Results 1 to 5 of 5

Thread: Help accessing b9021.

  1. #1
    Junior Member
    Join Date
    Apr 2018
    Posts
    26

    Default Help accessing b9021.

    Recently installed gm 50lb injectors with data transfered over from newer file with those injectors. Truck runs great and trims are all great while under load. Decel it goes rich and the injectors won’t hit minimum pwm. Does anyone have cax for 12592618 so I can adjust properly. Any help greatly appreciated thanks I believe it’s an adjustment that’s allowed in hp tuners but I’d prefer not to burn 100 in credits if I don’t have too
    Last edited by Andyb756; November 8th, 2018 at 03:16 AM.

  2. #2
    Junior Member
    Join Date
    Apr 2018
    Posts
    26

    Default

    I believe I’ve located it. Newbie error. Thanks

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    in here: need-B9021-for-01250003

    no worries, glad you found it.

  4. #4
    Junior Member
    Join Date
    Apr 2018
    Posts
    26

    Default

    While I’ve got you is this something that you zero out or just lower to get desired results?
    Quote Originally Posted by joecar View Post
    in here: need-B9021-for-01250003

    no worries, glad you found it.

  5. #5
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Lower.

Similar Threads

  1. need B9021 for 01250003
    By BLK02WS6 in forum CAX Files
    Replies: 28
    Last Post: December 10th, 2019, 11:04 AM
  2. b9021 help
    By danny68ss in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: January 14th, 2015, 09:49 PM
  3. trouble accessing calc.vet map
    By Bill00Form in forum FlashScan V2
    Replies: 1
    Last Post: December 2nd, 2011, 04:37 AM
  4. is B9021 available for OS 12587603?
    By BlackGMC in forum Gen III V8 Specific
    Replies: 4
    Last Post: November 4th, 2011, 03:39 AM
  5. b9021
    By drdarthinvader in forum Gen III V8 Specific
    Replies: 5
    Last Post: September 19th, 2010, 12:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •