Results 1 to 2 of 2

Thread: B4001 injector scaling question

  1. #1
    Lifetime Member
    Join Date
    Mar 2005
    Posts
    355

    Default B4001 injector scaling question

    Hi,
    I'm trying to find a definitive guide as to what to do when your B4001 table has a maximum of 7.999g/s
    2007 VE Holden O/S 12619078 Calibration 12619077
    The customer has fitted a supercharger with 60lb/hr Deatchworks injectors.
    Any experiences shared would be much appreciated.
    Thanks,
    Mike
    "Just a tune > yeah right !!!! "

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    You could do either one of these:
    - scale IFR, VR, MAF by the same factor (and shift all the tables that reference/index by g of g/s).
    - scale IFR and STOICH (B3601) by inverse factors.

Similar Threads

  1. Injector Flow Rate table B4001 ????'s
    By GAMEOVER in forum Gen III V8 Specific
    Replies: 2
    Last Post: May 3rd, 2010, 10:35 PM
  2. B4001 Injector Flow Rate table help
    By kwhiteside in forum Gen III V8 Specific
    Replies: 14
    Last Post: June 30th, 2009, 10:45 AM
  3. Injector scaling question. Which rate to use
    By ViolatorTA in forum General (Petrol, Gas, Ethanol)
    Replies: 10
    Last Post: June 15th, 2006, 01:19 AM
  4. Injector scaling question for Motron 60's..
    By Redline Motorsports in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: April 3rd, 2006, 05:19 AM
  5. injector flow rate b4001
    By minytrker in forum General (Petrol, Gas, Ethanol)
    Replies: 5
    Last Post: March 19th, 2006, 05:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •