Results 1 to 3 of 3

Thread: AEM 30-0334 OBDII X-Series Wideband for FlashScan V2 getting to log ARF and set BEN

  1. #1
    New Member
    Join Date
    Jan 2019
    Posts
    5

    Default AEM 30-0334 OBDII X-Series Wideband for FlashScan V2 getting to log ARF and set BEN

    Hi quite new to all of this i think i have managed to get it to log afr on a dual wideband setup with the obdII sensors but i cant seem to work out how to get a BEN factor to work and would be good to know if i have set up the afr properly thanks for any help.

  2. #2
    New Member
    Join Date
    Mar 2015
    Posts
    1

    Default

    Having the same problem. Can’t read AFR on V2

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,752

    Default

    Sorry, I have been out of town several times already this year.


    Are you connecting the 0334 using analog wiring or CAB bus (the 0333 and 0334 have no serial comm port)...?

    If you're using CAN bus, do you have one 0333 and one 0334 as your dual widebands...?


    Post your FSV2 Options.txt file (I need to see which pids you are logging), and post a screenshot of the V8 S&T BBX display.


    Which ECM...? Which year/model/vehicle...?

Similar Threads

  1. The AEM 30-0334 OBDII X-Series Wideband for FlashScan V2 is finally available,
    By dr.mike in forum General (Petrol, Gas, Ethanol)
    Replies: 82
    Last Post: 3 Days Ago, 06:20 AM
  2. AEM X-Series OBDII Wideband UEGO AFR Sensor Controller Gauge
    By Gelf VXR in forum General (Petrol, Gas, Ethanol)
    Replies: 206
    Last Post: July 24th, 2017, 07:58 AM
  3. AEM X-Series Wideband - Serial
    By Gregs in forum General (Petrol, Gas, Ethanol)
    Replies: 43
    Last Post: April 13th, 2017, 07:20 AM
  4. AEM wideband to FlashScan V2
    By T34418L31 in forum FlashScan V2
    Replies: 61
    Last Post: May 13th, 2015, 11:22 PM
  5. BEN is only for analog, right? How do I log BEN with serial logging?
    By Supercharged111 in forum General (Petrol, Gas, Ethanol)
    Replies: 18
    Last Post: July 12th, 2009, 05:08 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •