Results 1 to 5 of 5

Thread: LBZ GPCM change

  1. #1
    New Member
    Join Date
    Mar 2018
    Posts
    6

    Default LBZ GPCM change

    Hi I need to change out my Glow controller on my LBZ but not sure on how to re-link the new GPCM to the ECM, please keep any advice "simple" still new at this game and using a V2 with laptop

    Regards Bruce
    Regards Bruce

    Nissan GU Patrol
    06 LBZ Duramax, Allison trans
    Transco JR kit and pump pressure upgrade
    EGR removed, custom made inter-cooler pipework, DP5 switch

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    I think you might need it programmed via GM TIS first (assuming it's new).
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    New Member
    Join Date
    Mar 2018
    Posts
    6

    Default

    I should of mentioned that it was a second hand GPCM and I am running a set of non stock tunes (DP5)
    Regards Bruce

    Nissan GU Patrol
    06 LBZ Duramax, Allison trans
    Transco JR kit and pump pressure upgrade
    EGR removed, custom made inter-cooler pipework, DP5 switch

  4. #4
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    If the GPCM is used then I think the V2 can do what you need, plug it in to the OBD-II port.
    Press F2 - Tune Tool
    Press F2 - Injectors
    Press F3 - Read ECM Inject
    Press F2 - Program GPM Inject

    That should read the stored values in the ECM and program them in to your new (used) GPCM.
    I no longer monitor the forum, please either post your question or create a support ticket.

  5. #5
    New Member
    Join Date
    Mar 2018
    Posts
    6

    Default

    Thanks
    Regards Bruce

    Nissan GU Patrol
    06 LBZ Duramax, Allison trans
    Transco JR kit and pump pressure upgrade
    EGR removed, custom made inter-cooler pipework, DP5 switch

Similar Threads

  1. What to change and how to change
    By gigabrock in forum Duramax LB7
    Replies: 1
    Last Post: July 20th, 2012, 03:52 AM
  2. change os or not and how to do it?
    By rennat_2006 in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 0
    Last Post: November 9th, 2011, 06:36 PM
  3. LBZ gear change
    By IdahoRob in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 6
    Last Post: March 28th, 2008, 01:25 PM
  4. Change to Manual Trans with LBZ
    By thetallengineer in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 3
    Last Post: March 23rd, 2007, 03:42 PM
  5. LBZ tire size change
    By BigTex in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 8
    Last Post: January 12th, 2007, 02:14 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •