Results 1 to 5 of 5

Thread: E38 or E67 for mixed bag?

  1. #1
    Junior Member
    Join Date
    Dec 2007
    Posts
    19

    Default E38 or E67 for mixed bag?

    So I've built a L92 out of a yukon denali. It came to me as a core, so I have no harness or ECM yet. Its going in to a 71 C10. The only mods to the engine is the ASA camshaft & remove VVT. The trans is T56 magnum. So is the E38 the ECM I should shoot for? or should I get the E67? Is there an option to run the manual transmission with the E67? Is one going to be easier to tune than the other?

  2. #2
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    4,935

    Default

    CTS-V uses LSA+T6060 combo so there are manual OS' available. E38 you could use a Camaro OS or Corvette OS, both available with manual trans. Both are going to be tuned the exact same way, biggest difference will be lack of Class II comms on the E38 but not important as this is a swap application. Figure out what pedal assembly you want to use and match the ECM+ECM OS to that.
    ~Erik~
    2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
    2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
    2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.

  3. #3
    Junior Member
    Join Date
    Dec 2007
    Posts
    19

    Default

    So basically find the pedal i want to run? I've read that the e67 is easier for cruise to be added?

  4. #4
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    4,935

    Default

    Quote Originally Posted by BustedTruck View Post
    So basically find the pedal i want to run? I've read that the e67 is easier for cruise to be added?
    If you want to run cruise, then look into how/what BCM integration is needed. I know the E67 can be done without a BCM, believe it's a TrailBlazer or Colorado OS. No clue about the E38 unfortunately, I mostly deal with factory applications.
    ~Erik~
    2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
    2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
    2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.

  5. #5
    Lifetime Member
    Join Date
    May 2012
    Posts
    303

    Default

    Yes, Trailblazer CAl doesnt need BCM for cruice control, have used both, only complain about E67, in a couple of builds, had and issue, where going WOT, it would not open Throttle right away, tried everything on the tune, etc, couldnt fix it, other than that, all ok.

Similar Threads

  1. Bag of parts........
    By Scarface in forum Duramax LB7
    Replies: 24
    Last Post: June 16th, 2016, 01:49 PM
  2. my air bag light came on after a tune
    By ace68 in forum Gen III V8 Specific
    Replies: 15
    Last Post: May 15th, 2011, 09:44 AM
  3. E38 and E67 - GM Original Reprogramming
    By S10Wildside in forum E37, E38 & E67 PFI ECM's
    Replies: 12
    Last Post: May 2nd, 2010, 10:30 AM
  4. Bug > Serial WBO2 Lambda and EQ mixed up
    By nevinsb in forum FlashScan V2 BB Logging
    Replies: 0
    Last Post: June 16th, 2009, 08:57 AM
  5. Can I scan for an air bag code??
    By 06bowtie_guy in forum General
    Replies: 6
    Last Post: March 12th, 2007, 01:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •