Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Ls1b l31 5.7l

  1. #1
    Junior Member koolky's Avatar
    Join Date
    Aug 2013
    Posts
    49

    Default Ls1b l31 5.7l

    I thought I'd share these 2 unusual tune files I have. Both are from Mexico market GMT800 (99-06 & 07 Classic) Silverado 3500’s that came with 5.7L L31 CPI engines and 5 speed manual transmissions. They are both LS1B 1mb, 4x low resolution crank reluctor, basically a V8 enabled version of the 4.3L of the same era. I’m sure a few people will find these handy for engine swaps. I’m working on 350ci SBC EFI conversion with a manual transmission and I think these are a better option than manual transmission segment swapping an 01-02 512kb van OS.

    If anyone else has similar files I’d appreciate if they’d share them. I’d like to have one for every model year 

  2. #2
    Lifetime Member ChipsByAl's Avatar
    Join Date
    Feb 2006
    Posts
    583

    Default

    Thanks for sharing.
    Al
    "Trash that carb and get Injected!"

  3. #3
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    12,780

    Default

    Nice one, particularly for the 1Mb PCM.
    Need official EFILive help, please go here.
    For tuning support please post your questions on this forum (or other auto forums).
    Sorry if I don't respond to your PM, don't take it personal.


  4. #4
    Lifetime Member Doc's Avatar
    Join Date
    Oct 2005
    Posts
    733

    Default

    Here is a 2004
    Attached Files Attached Files

    2000 Silverado Full Size 4x4: Forged 6.2, H/C F1R Procharger
    98A4 Z28: 02 PCM H/C Forged 347, 9" Moser 3.73
    V1 V2 99+up RR COS #5 OLSD Dual Stg N20
    www.eifalchemy.com
    www.greatamericancarwar.com

  5. #5
    Lifetime Member SS2win's Avatar
    Join Date
    Feb 2005
    Posts
    355

    Default

    Thanks! More to toy with
    2001 Camaro SS #2020
    Stock LS1 w/InconTT | REV Springs | Ti retainers | M6 | McLeod Twin Clutch
    UMI RR K Member | SLP Subframe Connectors | Global West TA | BMR PHB | Metco LCA
    996 Brake Kit| 17" CCW Classics | 17x11 ZR1 Replicas on all four corners

    425@6lbs | ???@12lbs | EFILive Custom OS3 | !MAF | SD
    11.73@12x/1.7 on worn out nittos... yaaawn!

  6. #6
    Lifetime Member THEFERMANATOR's Avatar
    Join Date
    Mar 2009
    Posts
    790

    Default

    I know most just use the van OS, but here's an 01 L31 manual trans from a GMT-800 truck out of Mexico. I'm still on the hunt for an 02 to compare to the 02 van OS. I did see quite a bit of difference in the VE table when comparing this one to the 02 van tune file I have. I know the L31 in the GMT-800 trucks used the larger MAF sensor like the LS engines used, but I wouldn't think that would make that big of a flow difference, especially considering the MAF scaling is different in each tune to match the MAF sensor used. Or it could be the newer intake just flows that much more(in which case I'm going to put one in my TAHOE).

    2001 L31 manual.ctz
    1995 GMC 2500 SUBURBAN powered by 01 DURAMAX/ALLISON, little of this, a little of that,
    DIAMONDEYE 4" exhaust, CORSA muffler, AFE stage 1 dry filter, custom tuning by me, KENNEDY single pump and pump rub kit.

  7. #7
    Junior Member koolky's Avatar
    Join Date
    Aug 2013
    Posts
    49

    Default

    It'd be nice to have some people in Mexico reporting back VIN's. I've come across a few 2006 GMT400 C3500HD 8.1L Manual online but no VIN listed. Also, It seems that all the L31 GMT800's that I find are 2005 and 2007, makes me wonder if they only made them on odd number years.

  8. #8
    Lifetime Member Tinbender59's Avatar
    Join Date
    Jun 2010
    Posts
    284

    Default

    thanks for posting those tunes, If I had the money I would set up a tune repository and start collecting tunes for others to access. I have found links to a couple of repository's but they always seem to be difficult to access or outdated. There was one on drop box, but now I cant find it.


    well stupid me I dug through some old emails and found this

    https://www.dropbox.com/sh/4ydh5wltk...s4SRJ9NGa?dl=0

  9. #9
    Lifetime Member THEFERMANATOR's Avatar
    Join Date
    Mar 2009
    Posts
    790

    Default

    I found a list online of a company auctioning off trucks and it had vin numbers listed. That was how I found the 01. From what I've found, 1500's were 4.3's, 2500's were still 6 lug, but had the 5.7l up to 02, 5.3l after 03, and the 3500's kept the 5.7l through 07 classic and all I've seen were 5 speed manuals. It took me weeks to find that list, but they were all 3500's and up. Still looking for an 02 2500 with a 5.7l auto to see what GM did differently for them. The only difference's I seen in the 01 was the maf scaling since the gmt-800 trucks use an 85mm maf vs the vans 75mm maf, and the VE table was a good bit higher all around(not sure if this was due to the different intake, larger maf, or that they're tuned to run on leaded or unleaded fuel).
    1995 GMC 2500 SUBURBAN powered by 01 DURAMAX/ALLISON, little of this, a little of that,
    DIAMONDEYE 4" exhaust, CORSA muffler, AFE stage 1 dry filter, custom tuning by me, KENNEDY single pump and pump rub kit.

  10. #10
    Junior Member koolky's Avatar
    Join Date
    Aug 2013
    Posts
    49

    Default

    I'll keep looking for some 2002 VIN's and post them up if I find any. I did manage to find the 2006 GMT400 C3500HD 8.1L Manual that I was looking for. I was expecting it to run a 1MB ECM but it is 512kb with OS 12216125.

    2006 GMT400 8.1L Manual Mexico (12216125).ctz

Page 1 of 2 12 LastLast

Similar Threads

  1. L31 OS Change
    By SkinnyPedal in forum Vortec V6/V8 Specific
    Replies: 1
    Last Post: October 22nd, 2013, 03:33 AM
  2. whipple L31 4L80
    By nissmo in forum Vortec V6/V8 Specific
    Replies: 0
    Last Post: August 3rd, 2012, 04:24 AM
  3. need help with l31
    By ammarii in forum Vortec V6/V8 Specific
    Replies: 6
    Last Post: February 19th, 2009, 10:47 AM
  4. Vortec (L31) What's up?
    By ChipsByAl in forum General (Petrol, Gas, Ethanol)
    Replies: 14
    Last Post: January 3rd, 2007, 03:09 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •