Results 1 to 2 of 2

Thread: Procharged ls1a

  1. #1
    New Member
    Join Date
    Mar 2019
    Posts
    2

    Default Procharged ls1a

    looking for some adivse on how to add a little more fuel into my tune. So background on the car, is i bought this car with a tune and the procharger already in it. i have read the tune and have a copy of it saved. So when i bought the car the procharger pulley was slipping so i bought a surgrip and went from a 3.85 to a 3.6 pulley in size. After i looked further into this not only was the belt slipping the right intercooler was off. So after fixing all the boost leaks and the slipping the car runs great no but a little lean and i need to add some more fuel and some timing to help richen it up.

    car has a kenne bell boost a pump, bigger injectors looking up the model to know what kind. i know i need a dyno tune on it but i want to try my hand at maybe seeing if i can understand how this works and save some money. i due programming for compuers all day so this is not any different just need some info on what i need to do and how to increase and decrease.

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Would need to see your tune...

    I would increase the PE table.

    Then, if you're SD the VE table could be increased.

    Depends on how it was scaled for IFR... it might be as simple as decreasing the stoich AFR (B3601).

Similar Threads

  1. Cannot Read LS1A PCM's
    By Schwanke Engines in forum General
    Replies: 4
    Last Post: September 24th, 2018, 08:49 AM
  2. LS1A Tuning
    By RADustin in forum Gen III V8 Specific
    Replies: 14
    Last Post: September 26th, 2017, 01:21 AM
  3. 98 ls1a can't segment swap
    By bubba68ss in forum Gen III V8 Specific
    Replies: 9
    Last Post: June 24th, 2016, 04:51 AM
  4. 98 ls1a streaming?
    By Jakes4321 in forum Purchase and Shipping
    Replies: 1
    Last Post: March 2nd, 2014, 07:47 PM
  5. V2 will not communicate with LS1A PCM's
    By Schwanke Engines in forum FlashScan V2
    Replies: 19
    Last Post: June 25th, 2012, 05:21 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •