99 with COS3 SD AutoVE _0004.ctz
This is the tune of where I am now. Probably get it on the road in a week or more. Then I can do more VE tuning than 1800-2000 RPM in the garage.
It's coming along.
99 with COS3 SD AutoVE _0004.ctz
This is the tune of where I am now. Probably get it on the road in a week or more. Then I can do more VE tuning than 1800-2000 RPM in the garage.
It's coming along.
____________________________
1999 GMC, rcsb, 2wd, 5.3, XR275HR-12
Radix magnacharger mp112
Long tubes true duals, $L60E
99_RAFPN_Apr29_0004.efi
Here is my cold idle to operating temp. I still have some work to do on IAC values.
Also, my serial LC-1 using FSV2 is not close to my analog values using V1. I think I missed something in setting up the serial V2. Should I start a different thread?
AutoVE_99_Apr29_0004analog.efiAutoVE_99_Apr29_0004serial.efi
____________________________
1999 GMC, rcsb, 2wd, 5.3, XR275HR-12
Radix magnacharger mp112
Long tubes true duals, $L60E
I forgot to mention the AFR displayed on FSV2 seems correct, but my logs show a different value.
____________________________
1999 GMC, rcsb, 2wd, 5.3, XR275HR-12
Radix magnacharger mp112
Long tubes true duals, $L60E
I found the calc_pids file I was using was blank. Now with the file from here it the afr values seem correct...
https://forum.efilive.com/showthread...in-single-log)
I am still working on IAC settings.
____________________________
1999 GMC, rcsb, 2wd, 5.3, XR275HR-12
Radix magnacharger mp112
Long tubes true duals, $L60E
I was not having too much luck getting the serial readings to match the what my V1.2 will read analog. I was not able to update the firmware either, likely because I was using an old XP laptop.
I have now reinstalled the software into a newer windows 10 and successfully updated FSV2 as well as V7.5 and V8
Tomorrow I will attempt to get serial to LC-1 working again. I used the attached calc_pids. I'm not too confident I have everything right yet.
calc_pids.txt
Also here is my tune so far
SD AutoVE COS3 _0001.ctz
____________________________
1999 GMC, rcsb, 2wd, 5.3, XR275HR-12
Radix magnacharger mp112
Long tubes true duals, $L60E
This is the V8 pid files I'm going to try
LS1B autoVE and idle.txt
____________________________
1999 GMC, rcsb, 2wd, 5.3, XR275HR-12
Radix magnacharger mp112
Long tubes true duals, $L60E