Results 1 to 8 of 8

Thread: What happend to commanded AFR and Injector PW Pids?

  1. #1
    Member
    Join Date
    Jan 2009
    Posts
    70

    Default What happend to commanded AFR and Injector PW Pids?

    I'm working with a '07 Silverado E38 (OS 12614088). When the scan first starts I see "good" Commanded AFR. But after about 4 seconds it suddenly jumps to 29.36 (twice 14.68). At the same time Injector Pulse Width jumps from 234 mSec (an impossible number) to 456 mSec. I'm using E38AFRATIO_DMA and GM.IBPW1 & GM.IBPW2, same PIDs I use with a '06 Z06 (OS 12605732).

    By the way, thanks to Dragframe's " Interesting Issue: MAF failure = Idle tables ignored. Cant tune VE because of it" thread! Same year / OS. I saw the same MAF problem. That post helped me understand why I could not tune the idle.

  2. #2
    Junior Member
    Join Date
    Mar 2010
    Posts
    20

    Default

    Quote Originally Posted by Yellow05C6 View Post
    I'm working with a '07 Silverado E38 (OS 12614088). When the scan first starts I see "good" Commanded AFR. But after about 4 seconds it suddenly jumps to 29.36 (twice 14.68). At the same time Injector Pulse Width jumps from 234 mSec (an impossible number) to 456 mSec. I'm using E38AFRATIO_DMA and GM.IBPW1 & GM.IBPW2, same PIDs I use with a '06 Z06 (OS 12605732).

    By the way, thanks to Dragframe's " Interesting Issue: MAF failure = Idle tables ignored. Cant tune VE because of it" thread! Same year / OS. I saw the same MAF problem. That post helped me understand why I could not tune the idle.
    Yeah that maf fail issue haunted me. I made a big change i need to test to see if it will idle now with the mad failed though. I report back to ya when i get around to failing the maf again. Right now its running surprisingly well MAF-OL. (I have odd issues in closed loop but thats another topic... this 07 e38 is a pain)

    When its coming to the commanded AFR issue... that is bizarre. When i get away from work ill poke around and see if i can find anything. Can you post the tune and log?

  3. #3
    Member
    Join Date
    Jan 2009
    Posts
    70

    Default

    This is on a GMPP LS3 DR525 crate engine with a magnuson supercharger.

    BarryNewStart_0009.ctzBarry Cold Start 8-5-2019.efi

  4. #4
    Junior Member
    Join Date
    Mar 2010
    Posts
    20

    Default

    Quote Originally Posted by Yellow05C6 View Post
    This is on a GMPP LS3 DR525 crate engine with a magnuson supercharger.

    BarryNewStart_0009.ctzBarry Cold Start 8-5-2019.efi
    Hmm latest update locked older versions from opening its tune files. Ever since HPT and EFILive started deleting epa tables off i dont want to update lol

  5. #5
    Member
    Join Date
    Jan 2009
    Posts
    70

    Default

    The GMPP kit uses an E67. This is just the GMPP engine with a non-GMPP harness and an E38.

  6. #6
    Junior Member
    Join Date
    Mar 2010
    Posts
    20

    Default

    What I meant is in the latest efi live update, they changed some security stuff and older versions of the software wont open files from the latest software.

    BTW. I figured out my idle issue was table b1703 has a ridiculously low figure like 60 in it. Once I raised that up to match b1701 my idle issue went away in SD. I found other issues tho like trans pressure going bezerk (blew a trans cooler line even). I got two logs in sd, fixed the ve up a fair bit off that, and put the maf back on. My afr is much closer to my commanded afr now.

    Did you ever figure out your commanded afr issue??

  7. #7
    Member
    Join Date
    Jan 2009
    Posts
    70

    Default

    I have not had time to tinker with it. I live near ground zero for Hurricane Michael and life has a way of getting in the way of fun.

  8. #8
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by Yellow05C6 View Post
    I'm working with a '07 Silverado E38 (OS 12614088). When the scan first starts I see "good" Commanded AFR. But after about 4 seconds it suddenly jumps to 29.36 (twice 14.68). At the same time Injector Pulse Width jumps from 234 mSec (an impossible number) to 456 mSec. I'm using E38AFRATIO_DMA and GM.IBPW1 & GM.IBPW2, same PIDs I use with a '06 Z06 (OS 12605732).
    GM.IBPW1/2 are for LS1 and E40.
    GM.INJPWB1/2 are for E38, E67, E92.

Similar Threads

  1. What PID to scan commanded afr & injector duty cycle for e78
    By wesam in forum E78, E83, E84 PFI ECM's
    Replies: 32
    Last Post: September 21st, 2012, 05:58 AM
  2. What PID to scan commanded afr & injector duty cycle for e78
    By wesam in forum E39, E80, E82 & E92 SIDI ECM's
    Replies: 32
    Last Post: September 21st, 2012, 05:58 AM
  3. Commanded AFR not equal to WBo2 AFR at idle.
    By macca33 in forum Gen III V8 Specific
    Replies: 34
    Last Post: April 6th, 2012, 11:56 AM
  4. AFR Commanded... Where else other than PE???
    By Behold in forum General (Petrol, Gas, Ethanol)
    Replies: 10
    Last Post: October 27th, 2011, 12:27 AM
  5. Cold AFR doesn't follow commanded AFR
    By LS1_Dragster in forum Gen III V8 Specific
    Replies: 29
    Last Post: August 17th, 2009, 01:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •