Results 1 to 3 of 3

Thread: Tuning Tutorial/V8 Question

  1. #1
    New Member
    Join Date
    May 2018
    Posts
    2

    Default Tuning Tutorial/V8 Question

    I am working on an engine swap using an LS1 from a 2002 Z28. It needs to be tuned for bigger, shorter exhaust, no cats, bigger cam, cold air intake, etc. I really like the interface in V8, it seems much more user friendly than V7.5. Two questions from a newb:

    1. Are CALC.VET and CALC.MAFT the most recent procedures for creating the VE and MAF tables?

    2. Are there any versions of the tutorials that are for V8? Or is there a crossover between V7.5 PIDs and V8 PIDs? Is it usually pretty obvious, and I have been able to create the calculated PIDs in the editor (which is awesome). But, there are some I am not totally sure about like some of the DYNCYLAIR (as opposed to DYNCYLAIR_M) and others.

    I guess that's more than two questions.

    Thanks!

  2. #2
    New Member
    Join Date
    May 2018
    Posts
    2

    Default

    60 views, no comments. Did I say something wrong?

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    I'm just working my way thru a series of posts


    Yes, use CALC.VET for a quick correction of MAF and in most cases recalculation of VE to match (may need VE to be further tuned, but it is a good starting place).

    V8 _DMA (_M) pids have names differing from V7.

    Right now, it's easier to just use V7 for tuning.

Similar Threads

  1. COS Tutorial question...
    By overS10ded in forum Custom Operating Systems
    Replies: 11
    Last Post: June 14th, 2015, 11:16 PM
  2. quick question about the CALC.VE tutorial
    By BlackGMC in forum Gen III V8 Specific
    Replies: 7
    Last Post: September 30th, 2010, 03:23 PM
  3. Question on Tuning with AutoVE tutorial
    By kwhiteside in forum Gen III V8 Specific
    Replies: 14
    Last Post: July 1st, 2009, 02:35 AM
  4. Question from EFI Live tutorial
    By onfire in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 3
    Last Post: March 13th, 2006, 07:14 AM
  5. BEN_LC12 and AutoVE tutorial Question
    By mtnman in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: February 4th, 2006, 09:07 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •