Results 1 to 3 of 3

Thread: Efi V2 firmware help - Firmware Erased - V8 unable to load firmware - Button missing

  1. #1
    New Member
    Join Date
    Feb 2012
    Posts
    3

    Default Efi V2 firmware help - Firmware Erased - V8 unable to load firmware - Button missing

    I haven’t tuned any of my trucks since 2009-10. So my V2 firmware and boot block was so out of date that I needed to use the 7.5 firmware programmer to get it to a more recent boot block and firmware.
    But now I did a dumb move and somehow erased all my firmware through the onboard menu of the V2. V8 software couldn’t see my V2 before but does now except with a message telling me to update the firmware. Problem is the button "update firmware" in V8 is not there and since I erased my firmware, it appears my V2 is stuck in dead poll mode but I think it’s really because there is no software. V8 also says "Firmware version OK"
    The "Update Boot Block" button is there. When I press it, it says "device will remain in Dead - poll until the firmware is reprogrammed. Please program the device with the latest firmware now"
    I also tried again to use the 7.5 firmware programmer, but it says I need to put the V2 in Dead poll mode. It appears to be in dead poll mode with holding down the ctrl button when powering up.
    Hopefully all my info helps to find a resolution
    Any help and or experience and directions would be greatly appreciated
    Thanks!
    Happy Easter!
    Last edited by Mikee; April 21st, 2019 at 01:03 PM.

  2. #2
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,119

    Default

    It may be a case of not having the V2.04.xx firmware up to V2.04.74 before updating to V8 using the on-board option.
    In that case you'll need to follow the recovery process outlined in the EFILive document: \Program Files (x86)\EFILive\V8\Firmware\EFILiveRecovery\ReadMe.t xt

    Regards
    Paul
    Before asking for help, please read this.

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,752

    Default

    Mikee, let me know how you went


    ( follow the recovery doc mentioned by Paul: C:\Program Files (x86)\EFILive\V8\Firmware\EFILiveRecovery\ReadMe.t xt )

Similar Threads

  1. Updated firmware and now V2 unable to find vehicle
    By Naf in forum E37, E38 & E67 PFI ECM's
    Replies: 4
    Last Post: January 10th, 2016, 08:54 AM
  2. Replies: 7
    Last Post: January 3rd, 2015, 04:09 PM
  3. Firmware 2.06.10?
    By samh_08 in forum FlashScan V2
    Replies: 10
    Last Post: May 27th, 2009, 11:02 AM
  4. Firmware For V1?
    By JET LEE in forum FlashScan V1
    Replies: 3
    Last Post: March 3rd, 2007, 03:56 PM
  5. new firmware help-please!!
    By dynarex in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 14
    Last Post: January 14th, 2007, 10:22 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •