Results 1 to 4 of 4

Thread: length of data log

  1. #1
    Junior Member
    Join Date
    Apr 2019
    Posts
    11

    Default length of data log

    newbie here, first post.

    i searched as im not a newb to forums and could not find an answer.

    i installed a 32gb sdhc card last night, followed the instructions on how to format it -etc, and data logged this am. well after 10min. It stopped, i know usually data logs are done on dynos & quick WOT pulls etc, but i was doing it so i can learn and see how the "drivability" is.
    was 10min the max it could do?
    i was under the impression that i could go for hours with the card i used.

    any help is appreciated.

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    It stopped formatting...?

    Try formatting it on a PC.

  3. #3
    Junior Member
    Join Date
    Apr 2019
    Posts
    11

    Default

    No it formatted and data logged, but it only did it for 10 min.

    however, i think i may have selected too many pids unknowingly and that may have been the issue. i made another pid selection with fewer pids and it worked flawlessly.

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Try logging no more than 24 pid channels (see bottom of PIDs tab), as you have found.

Similar Threads

  1. Before I log data tomorrow...
    By Illegal Vette in forum Gen III V8 Specific
    Replies: 3
    Last Post: April 2nd, 2016, 05:31 AM
  2. Data Log
    By DarkDiesel in forum Cummins 5.9L
    Replies: 5
    Last Post: May 8th, 2015, 03:34 AM
  3. How to Data Log?
    By duramax07tmd in forum Diesel
    Replies: 13
    Last Post: May 13th, 2011, 12:28 PM
  4. LC-1 cable length
    By Eric in forum Gen III V8 Specific
    Replies: 115
    Last Post: January 18th, 2011, 08:37 AM
  5. Get log data off flashscan?
    By pavetim in forum Black Box Logging
    Replies: 2
    Last Post: November 23rd, 2010, 11:22 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •