Results 1 to 5 of 5

Thread: Converting 02 Z06 to automatic, questions...

  1. #1
    Lifetime Member
    Join Date
    Jul 2007
    Posts
    376

    Default Converting 02 Z06 to automatic, questions...

    I am putting in a 4L65E and will be controlling it via a Compushift Sport, but am trying to figure out which params I need to flash in the pcm to make it compatible w/the auto.

    This is what I was given by RPM:

    2 Blue wires will wire into the reverse light switch wiring at the transmission
    2 Purple wires will wire to the lower clutch pedal switch so that the car will only start in park or neutral
    For the upper clutch pedal switch the pink wires you will tie together so that your cruse will still work
    You will need to turn off the codes for the reverse lock out and skip shift solenoids

    Looking for thoughts as I complete this swap...
    07 Silverado DMax Classic
    02 Z06 LS3 416, 805rwhp, TFS245, Wiseco, Callies Crank/Rods, Iskendarian Lifters, Crower Rockers, FAST102/90, ATI Damper, 1-7/8 Kook's LT, QkTime Shield,Tolle-Fab 8pt
    Old Engine: 1/4mile = 9.6/146 New Engine:?

    EFI Live Tune/Scan v7.5.27, EFI Live Scan and Tune v8.2.23, build 276, BootBlock 2.07.06, FirmWare 2.07.52, 512K RoadRunner (12.14.R), Innovate Serial LC2x2


    COS5/12212156 For 2002 Z06 Manual Vette

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Let me see if I can obtain the PCM wiring schematics for the 2002 Z06.

  3. #3
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    4,935

    Default

    If the PCM wont be controlling the trans, I'd put a a manual calibration in it. I looked and seems the Compushift has some cool features, not sure what it offers over the factory control though?
    ~Erik~
    2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
    2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
    2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.

  4. #4
    Lifetime Member
    Join Date
    Jul 2007
    Posts
    376

    Default

    Quote Originally Posted by joecar View Post
    Let me see if I can obtain the PCM wiring schematics for the 2002 Z06.
    awesome, I can't seem to find it.

    Quote Originally Posted by ScarabEpic22 View Post
    If the PCM wont be controlling the trans, I'd put a a manual calibration in it. I looked and seems the Compushift has some cool features, not sure what it offers over the factory control though?
    The main advantage is I don't have to change PCMs or add wiring to the harness. I also like the ease of changing params on the CompuShift, done by IPhone. As usual, new product, I'll have to test it to find out what its about.
    07 Silverado DMax Classic
    02 Z06 LS3 416, 805rwhp, TFS245, Wiseco, Callies Crank/Rods, Iskendarian Lifters, Crower Rockers, FAST102/90, ATI Damper, 1-7/8 Kook's LT, QkTime Shield,Tolle-Fab 8pt
    Old Engine: 1/4mile = 9.6/146 New Engine:?

    EFI Live Tune/Scan v7.5.27, EFI Live Scan and Tune v8.2.23, build 276, BootBlock 2.07.06, FirmWare 2.07.52, 512K RoadRunner (12.14.R), Innovate Serial LC2x2


    COS5/12212156 For 2002 Z06 Manual Vette

  5. #5
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Hmmm, all I can find is schematics for 2002 Y-car with AT... let me see if I can at least find the MT schematics.

Similar Threads

  1. Ethanol questions - converting non-flex fuel to ethanol
    By BLK02WS6 in forum General (Petrol, Gas, Ethanol)
    Replies: 35
    Last Post: November 5th, 2012, 06:15 PM
  2. Two Engine Swap Questions (less tuning than converting, really)
    By Admiral Ballsy in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: March 10th, 2011, 06:38 PM
  3. automatic updates
    By jfpilla in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: January 3rd, 2008, 02:28 PM
  4. 02 Z06 D1SC tune questions....
    By JET LEE in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 29
    Last Post: April 3rd, 2007, 07:23 AM
  5. SD tune + Automatic
    By Phil99vette in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: August 10th, 2005, 03:35 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •