Results 1 to 3 of 3

Thread: Commanded fuel limiter

  1. #1
    Member arinkuddy's Avatar
    Join Date
    May 2014

    Default Commanded fuel limiter

    I was wondering if anyone has figured out a way to get the commanded fuel above 160mm3. I want to push it up to around the EFILive limit of 250 but I seem to be hitting some hidden limiter. When logging it stops at 160mm3 exactly.

    And yes I realize the commanded fuel is basically arbitrary I am trying to limit the light switch effect when boost comes up.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	cmd.PNG 
Views:	73 
Size:	96.9 KB 
ID:	22849  
    Attached Files Attached Files

  2. #2
    Lifetime Member 2007 5.9's Avatar
    Join Date
    Nov 2010


    I think that's just the ecm limits, the CMC goes to 165, and I believe the cmd and cme go to 170.
    Les Szmidt
    2007 5.9 Dodge Ram
    2014 Ram 3500 Aisin tuning Emissions Equipped
    EFI Live Cummins BETA Tester
    Silver Bullet Tuning

  3. #3
    Member arinkuddy's Avatar
    Join Date
    May 2014


    Thanks for the info.

    I ended up trying to use the 140-160 region to bring in the over stock fueling end that definitely helped. I had to do a lot of axis table changes.

    I thought about rescaling all the fuel axis by 1/2 or maybe even 1/10 but I'm a little concerned that might cause some unpredictable behavior.

    Sent from my SM-G935V using Tapatalk

Similar Threads

  1. e67 commanded fuel going lean
    By b18cls1 in forum E37, E38 & E67 PFI ECM's
    Replies: 6
    Last Post: May 2nd, 2015, 12:54 AM
  2. Commanded Fuel when Cranking
    By gpr in forum Gen III V8 Specific
    Replies: 31
    Last Post: March 11th, 2013, 11:33 AM
  3. Commanded fuel pressure Question
    By EVI in forum E37, E38 & E67 PFI ECM's
    Replies: 0
    Last Post: April 11th, 2012, 09:40 PM
  4. Commanded Fuel Pressure
    By Compcowboy in forum Cummins 6.7L
    Replies: 3
    Last Post: January 5th, 2012, 01:04 PM
  5. commanded air fuel
    By 69camaro5speed in forum General
    Replies: 4
    Last Post: March 11th, 2007, 12:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts