Are Peak and hold the proper type of injectors for a LS1 setup? I can get a great deal on a set of 4 of these RC Pl4-1000's, they have the Bosch style top so I think they will work.
https://www.rcfuelinjection.com/Stor...-hold-injector
Are Peak and hold the proper type of injectors for a LS1 setup? I can get a great deal on a set of 4 of these RC Pl4-1000's, they have the Bosch style top so I think they will work.
https://www.rcfuelinjection.com/Stor...-hold-injector
I think I answered my own question, these are 2.5 ohms so I would need an injector driver or do some resistors in series. AM I correct we need high impedance for the LS1 ECU's?