Can any one point into a direction that solve a safe mode issue on 2004 Monaro CV8 vehicle. The vehicle will randomly go into safe mode and we haven't been able to find the cause codeP2125 logs but I don't believe he throttle peddle is the issue.
Can any one point into a direction that solve a safe mode issue on 2004 Monaro CV8 vehicle. The vehicle will randomly go into safe mode and we haven't been able to find the cause codeP2125 logs but I don't believe he throttle peddle is the issue.
try a different Thottle Postion Sensor
330 rwkw EFILIVE OS 01290005 SD Cam / Head Tuned 6 speed VY SS Commodore
10/71 Blown 572 Big Block Chev HQ 2 Door Monaro
GM Performance Centre
Busselton WA
AUSTRALIA
Phone: 0447 003050
Don't have one spare to try. However I have managed to get a hold of Holden power train specialist, Holden don't have a part replacement currently on hand but the unit was manufactured in England, hoping they can help with the peddle sensor issue.
Can you check continuity across the solder joints.
Look at each one thru a magnifer/lupe, see if there are any cracks in the solder joints... you may have to reflow the solder.
The "wiped" areas of the traces: can you clean these (rub very lightly with brass wool, just clean them, do not take metal off).