Results 1 to 8 of 8

Thread: AEM 30-0300 Analog PID - Problems!

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    New Member
    Join Date
    Sep 2019
    Posts
    5

    Default AEM 30-0300 Analog PID - Problems!

    I've got the above Wideband installed and working but can't get my V2 to read correctly. I've tried using the calc pid from this post https://forum.efilive.com/showthread...or-AEM-30-0300 but it doesn't work for me. It logs AFR but the values are nowhere near what my gauge is reading. I believe that might be because the calc pid posted (linked to post #11 on a different thread) uses data for a 30-4900 which is unfortunately may not be the same as a 30-0300? But in addition, I also get GM.EQUIVRATIO as not validated and when I right click it, "More Info" is greyed out and can't be selected so I can't find out why... which could be what's holding me back.

    So, the manual for the 30-0300 is here: https://www.aemelectronics.com/files...ns/30-0300.pdf

    If anyone can either school me on how to interpret the data from the manual and put it into a calc pid file or do it for me it would be very much appreciated. I've spent hours trying different files and going in and out of the car, trying to get it to sync up with no luck. I am having my car remote tuned after a supercharger install and can't get any further until I get this sorted. E38 ECM on LS2 engine using Gasoline.

    Many thanks
    Last edited by St0rmer66; September 19th, 2019 at 06:22 AM.

Similar Threads

  1. AEM 30-0300 for my application?
    By aaronc7 in forum External A/D inputs
    Replies: 8
    Last Post: September 30th, 2018, 07:40 PM
  2. Replies: 3
    Last Post: August 8th, 2018, 07:49 AM
  3. Help creating calc.PID's for AEM 30-0300
    By chambiec1 in forum External A/D inputs
    Replies: 59
    Last Post: March 24th, 2018, 03:19 AM
  4. AEM wideband with V2 analog
    By articSS in forum External A/D inputs
    Replies: 1
    Last Post: December 11th, 2017, 11:21 AM
  5. Analog input / CALC-PID
    By AWL INN in forum General (Petrol, Gas, Ethanol)
    Replies: 8
    Last Post: July 3rd, 2008, 05:49 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •