Results 1 to 2 of 2

Thread: LNC002 lingenfelter 2step and timing retard pid help

  1. #1
    New Member
    Join Date
    Nov 2019
    Posts
    4

    Default LNC002 lingenfelter 2step and timing retard pid help

    Hey Guys,

    Having bit of trouble trying to get the lingenfelter LNC002 2step and timing control to log.

    I have tried selecting both the ad1 and ad2 options (it has a signal feed in the ad2 and my lc2 wideband in ad1 aswell as a earth) and both seem to be mimicking the signal from the lc2.


    I have tried the 2 step in the ad1 slot and it does seem to show correctly but then it throws out the LC2 reading.


    Fairly new to efi live and only really use it as a scan tool, so any help would be appreciated.

    Cheers Phill

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,785

    Default

    How did you wire it up...?

Similar Threads

  1. Find that timing retard!
    By ddnspider in forum Gen III V8 Specific
    Replies: 15
    Last Post: January 16th, 2015, 07:43 AM
  2. Lingenfelter LNC002 pid
    By Frozen WS6 in forum General
    Replies: 0
    Last Post: June 27th, 2010, 10:13 AM
  3. New PID for Lingenfelter launch controller...
    By WHYTRYZ06 in forum General (Petrol, Gas, Ethanol)
    Replies: 10
    Last Post: October 28th, 2008, 10:55 PM
  4. Timing retard
    By uaesands in forum E37, E38 & E67 PFI ECM's
    Replies: 2
    Last Post: August 25th, 2008, 09:25 PM
  5. 2step Timing Based vs Fuel
    By MN C5 in forum Custom Operating Systems
    Replies: 6
    Last Post: February 20th, 2006, 04:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •