Results 1 to 6 of 6

Thread: Error code 503 while it was programing

  1. #1
    Senior Member
    Join Date
    Aug 2011
    Posts
    145

    Default Error code 503 while it was programing

    Hey guys need help was programing a new file in on my 18 ran. While flashing with v2 went through the erase process and started programing then got 503 code . Now the flash scan won't stay connected to the PC while it's programing there. So how do I reset my flash scan? To make things worse my truck is disabled now and I won't program since the ECM is already erased please help

    Sent from my ONEPLUS A6013 using Tapatalk
    Tuning by Zack StarLite diesel

  2. #2
    Senior Member
    Join Date
    Aug 2011
    Posts
    145

    Default

    Quote Originally Posted by easymon View Post
    Hey guys need help was programing a new file in on my 18 ran. While flashing with v2 went through the erase process and started programing then got 503 code . Now the flash scan won't stay connected to the PC while it's programing there. So how do I reset my flash scan? To make things worse my truck is disabled now and I won't program since the ECM is already erased please help

    Sent from my ONEPLUS A6013 using Tapatalk
    Got it back up and running had to use pass through and use stock file then reinstall modded file. Not sure why losing connection bbx .

    Sent from my ONEPLUS A6013 using Tapatalk
    Tuning by Zack StarLite diesel

  3. #3
    Senior Member
    Join Date
    Aug 2011
    Posts
    145

    Default

    Could there be a problem with the new patches ? Everything was fine until updated firmware now v2 losses connection can't write files to it pass through working need some insight. Codes I get are 0001 -0002. PS I even uninstalled and reinstalled EFI live

    Sent from my ONEPLUS A6013 using Tapatalk
    Tuning by Zack StarLite diesel

  4. #4
    Senior Member
    Join Date
    Aug 2011
    Posts
    145

    Default

    Error according to the error code chart this has to do with drivers says contact EFI.

    Sent from my ONEPLUS A6013 using Tapatalk
    Tuning by Zack StarLite diesel

  5. #5
    Senior Member tylerltr450's Avatar
    Join Date
    Aug 2014
    Posts
    157

    Default

    Did you reinstall the usb driver?
    2006 Cummins Red, Auto to Nv5600, SBC 3600, Traction Bars, Visor, Running Lights, S&B Intake, ATS intake horn, EFI Live, Borg Warner S363 Turbo, Industrial Injection Dragon Fly Injectors.

  6. #6
    Senior Member
    Join Date
    Aug 2011
    Posts
    145

    Default

    Resolved just bad USB cable.

    Sent from my ONEPLUS A6013 using Tapatalk
    Tuning by Zack StarLite diesel

Similar Threads

  1. Replies: 3
    Last Post: October 29th, 2017, 12:06 PM
  2. Error code. help please
    By MattysTA in forum FlashScan V1
    Replies: 6
    Last Post: January 19th, 2012, 06:13 AM
  3. DSP5 Programing Problems
    By Hawks Fan in forum Duramax LLY
    Replies: 4
    Last Post: February 13th, 2011, 03:25 PM
  4. 01-02 to 03-04 cpu wiring and programing
    By woody69 in forum E37, E38 & E67 PFI ECM's
    Replies: 0
    Last Post: August 1st, 2007, 04:47 AM
  5. error code 11?
    By dynarex in forum General (Diesel)
    Replies: 0
    Last Post: April 23rd, 2007, 09:07 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •