Results 1 to 4 of 4

Thread: LSX454 E67 checksums disabled

  1. #1
    Junior Member
    Join Date
    Mar 2006
    Posts
    32

    Default LSX454 E67 checksums disabled

    I am trying to tune this LSX454 crate engine with the supplied E67 and harness. I was able to read the file with no issues, but it says Checksums Disabled and will not let me flash.

    Thanks for the help in advanceGeneGrimesLSX454_0000.ctz

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    This is normal for those GMPP files.
    You simply correct the checksums, if you are looking in V7 there is a button just above where the checksums are shown called "Update Checksums", click that and resave your file.
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    Junior Member
    Join Date
    Mar 2006
    Posts
    32

    Default

    That's what I did just making sure before I tried to flash it. Thanks

  4. #4
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Good decision to check, when they are marked as disabled it is usually ok to correct them, if they ever show as incorrect (with a red marker) then that would indicate there is probably something wrong with the file and it should not be used.
    I no longer monitor the forum, please either post your question or create a support ticket.

Similar Threads

  1. Checksums
    By twildman in forum Cummins 5.9L
    Replies: 3
    Last Post: January 28th, 2021, 02:27 AM
  2. LSX454 w GMPP E67 ECM - Idle Surge
    By LastCall in forum E37, E38 & E67 PFI ECM's
    Replies: 11
    Last Post: November 24th, 2017, 02:19 AM
  3. Tune file for a lsx454
    By stick100 in forum Gen IV V8 Specific
    Replies: 0
    Last Post: October 27th, 2013, 11:18 PM
  4. Replies: 9
    Last Post: September 30th, 2011, 03:23 PM
  5. one or more incorrect segment checksums?
    By dbaxter_ss in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: April 20th, 2005, 02:33 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •