I am trying to tune this LSX454 crate engine with the supplied E67 and harness. I was able to read the file with no issues, but it says Checksums Disabled and will not let me flash.
Thanks for the help in advanceGeneGrimesLSX454_0000.ctz
I am trying to tune this LSX454 crate engine with the supplied E67 and harness. I was able to read the file with no issues, but it says Checksums Disabled and will not let me flash.
Thanks for the help in advanceGeneGrimesLSX454_0000.ctz
This is normal for those GMPP files.
You simply correct the checksums, if you are looking in V7 there is a button just above where the checksums are shown called "Update Checksums", click that and resave your file.
I no longer monitor the forum, please either post your question or create a support ticket.
That's what I did just making sure before I tried to flash it. Thanks
Good decision to check, when they are marked as disabled it is usually ok to correct them, if they ever show as incorrect (with a red marker) then that would indicate there is probably something wrong with the file and it should not be used.
I no longer monitor the forum, please either post your question or create a support ticket.