Results 1 to 2 of 2

Thread: What are normal parameters

  1. #1
    New Member
    Join Date
    Mar 2018
    Posts
    3

    Default What are normal parameters

    I have been fighting a Jeep with an LS swap for a couple years now. Whatever I do, it just won’t run correctly. I’m at the point of watching parameters on a portable scanner while driving.
    My question is this, where do I find what the parameters “should” be? Such as, % and how often should the purge solenoid cycle, what should my cat temps be, what are proper fuel trim numbers, etc?

    My apologies for the original post, it got cut off when I posted it, and only a small portion of the post showed up. Thx for any help.
    Last edited by Razzer; 3 Weeks Ago at 01:41 AM.

  2. #2
    Junior Member
    Join Date
    Dec 2016
    Posts
    16

    Default

    I have a customer that fought a 2008 jeep for a couple years with a LS3 swap, they finally got a good harness, body control module and what not. I finished the tune a month or so ago and they could not be happier. Contact Dave or Corbin at Extreme Off Road, Clovis, California. google that for the phone number.
    -Carl

Similar Threads

  1. Normal Vs Performance
    By bstuder11 in forum Gen III V8 Specific
    Replies: 12
    Last Post: April 20th, 2011, 01:03 PM
  2. Isthis Normal?
    By Yortt in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 2
    Last Post: February 22nd, 2008, 11:14 PM
  3. what is normal operating ect?
    By Aint Skeered in forum Gen III V8 Specific
    Replies: 11
    Last Post: August 24th, 2007, 01:37 PM
  4. {B8001} Normal VE Calculation
    By limited cv8r in forum E37, E38 & E67 PFI ECM's
    Replies: 15
    Last Post: July 24th, 2007, 07:45 PM
  5. Is this normal for VE tuning
    By 98SS2836 in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: June 23rd, 2006, 09:24 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •