Results 1 to 7 of 7

Thread: LS1B VE Tuning No Effect

  1. #1
    New Member
    Join Date
    Nov 2018
    Posts
    4

    Default LS1B VE Tuning No Effect

    Hey guys, similar but opposite problem as the other thread but totally different setup.

    Cam/Ported stock heads/Shorty headers 00 Camaro

    It seems like we got the MAF sensor tuned in and it runs pretty well on that. We are now trying to dial in the VE table and are having trouble.

    1. I added like 20% to the VE table in WOT conditions and didn't really pick up any AFR. It seemed to be effecting cruise a little when I modified the map in that area. Didn't seem to have DTC related to MAF either although I tried to disable it.

    2. The % error calculation in the calc_pids file isn't correct. AFR seems to work. Why does it seem like this thing can't do math with negative numbers in that file?

    Attached are the tunes, files and logs. I read through all the stickies and stuff several times but I seem to have problems that I'm not supposed to
    Attached Files Attached Files

  2. #2
    Lifetime Member Gregs's Avatar
    Join Date
    Sep 2008
    Posts
    306

    Default

    I see you have 0Hz for the MAF fail. Have you tried 1Hz instead? Is the MAF unplugged? Are you getting a MIL for the MAF being failed? You should be getting a check engine light if the MAF is being failed correctly since you have the MIL enablers set to report the code.

    03 Silverado 5.3 ECSB 4x4 Z71
    Comp Cam 206/212 .515/.522 112 lSA, hardened rods with LS9 springs

    2010 Tahoe VVT AFM 5.3
    Stock for now

  3. #3
    New Member
    Join Date
    Nov 2018
    Posts
    4

    Default

    I actually had that idea. No, I don't believe I'm getting a code (Flashscan pulls nothing). No, I didn't unplug it. I was assuming the IAT was coming from it also?

    I'll set it to 1 and try. Thanks

  4. #4
    Junior Member
    Join Date
    Oct 2011
    Posts
    35

    Default

    change C2904/5 to 20000
    change c2903/6 to 1

    unplug the maf and try again, your not in speed density it sounds like, it should throw a MAF code instantly

  5. #5
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Important: are you seeing a MAF DTC...?

  6. #6
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Also:

    what are you doing with "(({CALC.AEM_AFR}-{GM.AFR})/{GM.AFR})*100", how are you adding that much percent to the VE table...?

    If you use "{CALC.AEM_AFR}/{GM.AFR}" you can paste-multiply this value directly into the VE table.

  7. #7
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Which stickies did you read thru...?

Similar Threads

  1. Spark IAT table and it's effect on spark tuning.
    By Illegal Vette in forum Gen III V8 Specific
    Replies: 5
    Last Post: May 30th, 2017, 05:35 PM
  2. 2 Quick Questions: LS1B Tuning
    By truethinker in forum Petrol / Gas
    Replies: 2
    Last Post: August 19th, 2015, 10:50 AM
  3. LS1B Black Box Tuning?
    By Wolfie in forum Gen III V8 Specific
    Replies: 21
    Last Post: May 8th, 2012, 05:00 AM
  4. Ported TB effect on VE?
    By Kevin Doe in forum General (Petrol, Gas, Ethanol)
    Replies: 5
    Last Post: April 22nd, 2008, 01:02 AM
  5. Tuning VE with RR...no effect
    By Wichita Dyno in forum RoadRunner Real-Time PCM Emulator
    Replies: 6
    Last Post: November 6th, 2007, 04:18 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •