Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: Wideband data freezes in V8

  1. #1
    Member ToonerSQUAD89's Avatar
    Join Date
    Dec 2018
    Posts
    74

    Default Wideband data freezes in V8

    Having a wierd issue. My AEM 0334 Can Wideband is reading fine on the AEM gauge. When logging after 4 mins or so, the data on my wideband freezes and doesnt move in V8.
    Tried Shutting down everything completely etc but still having the same issue. Any ideas what it could be?
    MIKE

  2. #2
    Lifetime Member
    Join Date
    Mar 2009
    Posts
    746

    Default

    My AEM freezes when I first plug it in. I have to navigate to the WB02 reading in the handheld and then it instantly works fine.
    1998 GMC Sierra K1500 5.7/4L80E, longtubes, 411 w/COS 5, marine cam/intake, Whipple. 91 octane at 6000'.
    1997 GMC Sierra K3500 7.4/4L80E, 411 w/COS 3, Whipple, small cam.
    2004 Corvette Z06 with longtubes.

  3. #3
    Member ToonerSQUAD89's Avatar
    Join Date
    Dec 2018
    Posts
    74

    Default

    Quote Originally Posted by Supercharged111 View Post
    My AEM freezes when I first plug it in. I have to navigate to the WB02 reading in the handheld and then it instantly works fine.

    Does yours freeze in the PID Monitor of V8, OR on the actual gauge. Im using a CAN based AEM. Which one are you using?
    MIKE

  4. #4
    Lifetime Member
    Join Date
    Mar 2009
    Posts
    746

    Default

    No CAN here, it would freeze on the laptop. The gauge worked fine.
    1998 GMC Sierra K1500 5.7/4L80E, longtubes, 411 w/COS 5, marine cam/intake, Whipple. 91 octane at 6000'.
    1997 GMC Sierra K3500 7.4/4L80E, 411 w/COS 3, Whipple, small cam.
    2004 Corvette Z06 with longtubes.

  5. #5
    Member ToonerSQUAD89's Avatar
    Join Date
    Dec 2018
    Posts
    74

    Default

    Quote Originally Posted by Supercharged111 View Post
    No CAN here, it would freeze on the laptop. The gauge worked fine.
    I don't have my V2 configured with a SD card to Scan and Log from it directly. Never had it done like that.
    MIKE

  6. #6
    Lifetime Member
    Join Date
    Mar 2009
    Posts
    746

    Default

    Me either, I just go to the WB02 readout on the thing and it unfreezes.
    1998 GMC Sierra K1500 5.7/4L80E, longtubes, 411 w/COS 5, marine cam/intake, Whipple. 91 octane at 6000'.
    1997 GMC Sierra K3500 7.4/4L80E, 411 w/COS 3, Whipple, small cam.
    2004 Corvette Z06 with longtubes.

  7. #7
    Member ToonerSQUAD89's Avatar
    Join Date
    Dec 2018
    Posts
    74

    Default

    Quote Originally Posted by Supercharged111 View Post
    Me either, I just go to the WB02 readout on the thing and it unfreezes.
    Ok ill give it a try. Does your happen instantly? Or does it happen a few minutes after logging.
    MIKE

  8. #8
    Member ToonerSQUAD89's Avatar
    Join Date
    Dec 2018
    Posts
    74

    Default

    I dont think that going to work bc that is serial based not CAN
    MIKE

  9. #9
    Member ToonerSQUAD89's Avatar
    Join Date
    Dec 2018
    Posts
    74

    Default

    Quote Originally Posted by ToonerSQUAD89 View Post
    I dont think that going to work bc that is serial based not CAN

    changed computers, still after 4 mins it locks up just the AEM Wideband PID from the Trans controller
    MIKE

  10. #10
    Member ToonerSQUAD89's Avatar
    Join Date
    Dec 2018
    Posts
    74

    Default

    has anyone had this issue. still cant resolve it
    MIKE

Page 1 of 3 123 LastLast

Similar Threads

  1. Replies: 1
    Last Post: September 6th, 2018, 05:47 AM
  2. Serial wideband with APSX wideband controller?
    By brentg454 in forum FlashScan V2
    Replies: 18
    Last Post: December 22nd, 2016, 04:02 PM
  3. Replies: 5
    Last Post: May 23rd, 2014, 02:31 AM
  4. Converting Ford style injector data to data useful to EFI Live.
    By JOHNBOY in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: May 11th, 2012, 05:19 AM
  5. Real Time Monitoring freezes EFLive & Dashboard Not working
    By gmh308 in forum Gen IV V8 Specific
    Replies: 4
    Last Post: September 25th, 2008, 09:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •