Results 1 to 4 of 4

Thread: V7.5 calc pid not showing

  1. #1
    New Member
    Join Date
    Feb 2020
    Posts
    5

    Default V7.5 calc pid not showing

    Hi guys

    After extensive reading and scrolling I thought I had nutted out my issue, but it turns out I havnt, I have modified my calc_pids file to suit my wideband (aem 30-300) but when I go to select the appropriate pids in v7.5 they do not appear,

    What am I missing?

    Any help on the matter would be greatly appreciated

  2. #2
    Member ToonerSQUAD89's Avatar
    Join Date
    Dec 2018
    Posts
    74

    Default

    Quote Originally Posted by SLUG57 View Post
    Hi guys

    After extensive reading and scrolling I thought I had nutted out my issue, but it turns out I havnt, I have modified my calc_pids file to suit my wideband (aem 30-300) but when I go to select the appropriate pids in v7.5 they do not appear,

    What am I missing?

    Any help on the matter would be greatly appreciated

    Where Are you looking and Are you using it in Serial or Analog. Can you post the Calc Pids File
    MIKE

  3. #3
    New Member
    Join Date
    Feb 2020
    Posts
    5

    Default

    Analog, in saying that, I went back through my user config txt file last night, checked every letter and every space, I don't know what was wrong with it because it all looked spot on, but when I saved before closing, ready to give up, I had one last look in v7.5 scan and low and behold it showed up

  4. #4
    Member ToonerSQUAD89's Avatar
    Join Date
    Dec 2018
    Posts
    74

    Default

    Ok sounds good
    MIKE

Similar Threads

  1. E67 PID GM.CKREFCYL what is it showing?
    By Turbo6.0L in forum E37, E38 & E67 PFI ECM's
    Replies: 11
    Last Post: January 21st, 2021, 01:10 AM
  2. PID in V7.5 Not showing up in BBX for e38
    By Age08 in forum FlashScan V2 BB Logging
    Replies: 1
    Last Post: July 9th, 2018, 05:00 PM
  3. pid's showing not supported
    By pero648 in forum FlashScan V1
    Replies: 1
    Last Post: July 20th, 2013, 03:24 PM
  4. PID keep showing unsupported
    By pavetim in forum Black Box Logging
    Replies: 7
    Last Post: June 13th, 2012, 10:01 AM
  5. e38 dma pid SCALEDCORVE_ doesnt work plus a bad calc pid
    By ringram in forum FlashScan V2 BB Logging
    Replies: 2
    Last Post: November 30th, 2008, 10:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •