Results 1 to 10 of 14

Thread: 88 Corvette with 5.3

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Member
    Join Date
    Apr 2020
    Posts
    10

    Default 88 Corvette with 5.3

    Hello all, stalking on the site for some time now, but mostly in the diesel section.

    I have a 5.3 with a big cam and LS6 intake, DBW throttle body and injectors(28.8).
    I am trying to get it started. I had a stock tune in it and pings like crazy. I did manage at one point to get it running and driving with a 15-20 min log, but would not idle for crap in P/N, in gear was decent. But now it will not start again.
    Did a lot of searching on but so far nothing has helped out and I seem to be going backwards now.
    Anyone have some solid suggestions and explain them in simple terms as I am still trying to figure out what I am doing.

    tune and log are attached. Any help would be greatly appreciated.

    Cam specs are:
    242/254 duration @ .050''
    113 lobe separation, 109 intake centerline (113+4)
    .621''/.612'' lift with 1.7 rockers

    Wideband: AEM 30-0300 and I do have it working via serial comms.
    Attached Files Attached Files

Similar Threads

  1. c5 corvette
    By johnorb26 in forum Gen III V8 Specific
    Replies: 1
    Last Post: September 15th, 2015, 11:27 AM
  2. 2010 A6 Corvette Transmission in 2007 Corvette Model
    By epic in forum E37, E38 & E67 PFI ECM's
    Replies: 2
    Last Post: April 24th, 2013, 01:23 PM
  3. Will E38 from 08 Corvette work in 2007 Corvette?
    By Chalky in forum Gen IV V8 Specific
    Replies: 2
    Last Post: June 5th, 2010, 10:00 AM
  4. New Corvette
    By 5.7ute in forum Lounge
    Replies: 8
    Last Post: June 29th, 2009, 05:19 PM
  5. Tune 97 Corvette ?
    By RPO_Z06 in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: August 3rd, 2006, 05:23 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •