Results 1 to 5 of 5

Thread: Rich idle fic 1200's

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Member
    Join Date
    Mar 2009
    Posts
    34

    Default Rich idle fic 1200's

    So I have a p59 3bar sd twin 61mm vs turbos. SS2 cam.The issue is as stated above. I have all injector data put in from FICs site I have tried changing the ve and commanded fuel vs rpm table but afrs are still 12.1-12.5 at idle. I am running 43.5 fuel pressure. Timing is right around 20⁰ at 800rpm. Am I asking too much of these injectors? I also noticed that inj_ms is staying around 2.13ms no matter what I change also.
    I originally thought it might be going into engine protection mode or something like that the way just sticks right in the 12s at idle. Intial start up(first .5 -2secs or so) it's right around 14.1 then slowly gets richer as the idle drops down to around 800. Any help would be great I have ran this car on basically the same ve table when in a maf based tune and it was great. This was the first startup/idle tuning I have done on it.
    Last edited by dmaxguy2008; May 18th, 2020 at 06:10 AM.

Similar Threads

  1. Need help - too rich at idle
    By brm in forum Gen III V8 Specific
    Replies: 3
    Last Post: November 8th, 2010, 09:20 PM
  2. help! rich at idle
    By drdarthinvader in forum Custom Operating Systems
    Replies: 3
    Last Post: December 13th, 2008, 07:00 PM
  3. Rich Idle - Please Help!
    By white01ss in forum General (Petrol, Gas, Ethanol)
    Replies: 36
    Last Post: April 30th, 2008, 05:09 AM
  4. Car Wont Idle And Runs Rich At Idle ( Tune Inside)
    By mikeyayell in forum Gen III V8 Specific
    Replies: 13
    Last Post: January 8th, 2008, 04:17 PM
  5. Idle is rich
    By zapp168 in forum Gen III V8 Specific
    Replies: 0
    Last Post: August 14th, 2007, 10:29 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •