Results 1 to 3 of 3

Thread: Injector timming on lml

  1. #1
    New Member
    Join Date
    May 2020
    Posts
    3

    Default Injector timming on lml

    When changing injector timming on main injection do I need to change all of it to the same amount such as every table under piliot injection #1 there is 10 plus tables all with different modes. Ive loged it and cant figure out when different modes come on or can you just edit one mode and somehow lock in in the one mode?

    --Thanks for the help

  2. #2
    Member
    Join Date
    Aug 2014
    Posts
    83

    Default

    The engine will use different maps based on altitude and egr status among other things. Only way to tell is by logging.

  3. #3
    Member
    Join Date
    May 2017
    Posts
    66

    Default

    If you are new to this you might want to leave those alone. The motor will rattle a lot if you jack them up too much, because they all look really low, If you want, copy and paste the high altitude map that has the most timing in it on all your low altitude maps.

Similar Threads

  1. LML injector check with V8
    By blaineGMC in forum Duramax 2011+ LML / LGH
    Replies: 1
    Last Post: June 11th, 2015, 08:43 AM
  2. Timing calculator?
    By longcummins in forum Cummins 6.7L
    Replies: 7
    Last Post: August 5th, 2014, 02:21 PM
  3. timming
    By chance cobb in forum Cummins 5.9L
    Replies: 28
    Last Post: October 14th, 2012, 05:50 AM
  4. Duramax timming
    By Rambo in forum Duramax LB7
    Replies: 8
    Last Post: April 7th, 2007, 07:23 PM
  5. retard timming for N.O.S. help please
    By RandyWS6 in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: March 9th, 2005, 05:52 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •