Results 1 to 2 of 2

Thread: pasting values in to Calc_Pids

  1. #1
    Senior Member
    Join Date
    Jan 2007
    Posts
    185

    Default pasting values in to Calc_Pids

    IS there a good way to paste values from the tune tool to a calc_pids file other than one at a time? I need to update my b4901 section and I did it one at a time and noticed I made a small mistake and just wondered if there was a simpler way.

    This was the original from calc_pids

    *CLC-00-260
    factor 0.0 1.0 .4 "lookup({SAE.MAF.gps}, 0,0.60010, 10,0.17139, 20,0.12842, 30,0.08594, 40,0.08106, 50,0.07129, 60,0.06201, 70,0.05469, 80,0.04736, 90,0.04297)"

    My b4901 is

    *CLC-00-260
    factor 0.0 1.0 .4 "lookup({SAE.MAF.gps}, 0,0.799805, 10,0.512207, 20,0.442871, 30,0.412109, 40,0.391113, 50,0.374023, 60,0.358887, 70,0.344727, 80,0.331543, 90,0.318359, 100,0.305664, 110,0.293457, 120,0.281250, 130,0.269531, 140,0.257324, 150,0.245605)"

    Also do I need to add the additional lines from 90 to 150?

  2. #2
    Senior Member
    Join Date
    May 2014
    Posts
    125

    Default

    You could copy with labels, pasted into excel. Save as a CSV, open that with notepad and that would do most of the work. You'd still need to put commas between each data set.

    Yes, keep the additional lines from 90 to 150

Similar Threads

  1. Calc_pids
    By Gregs in forum Gen III V8 Specific
    Replies: 10
    Last Post: August 13th, 2020, 02:08 AM
  2. creating calc_pids
    By grayphoenix85 in forum Petrol / Gas
    Replies: 18
    Last Post: April 28th, 2019, 10:32 AM
  3. Replies: 20
    Last Post: January 17th, 2012, 12:48 AM
  4. Cutting and Pasting
    By jamesbond2509 in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: May 29th, 2006, 05:43 PM
  5. DESIAC_B values and MAF values keep trimming down. Help!
    By ArKay99 in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: September 12th, 2005, 12:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •