Results 1 to 6 of 6

Thread: CM2100 High RPM Fueling

  1. #1
    Senior Member
    Join Date
    Aug 2019
    Posts
    142

    Default CM2100 High RPM Fueling

    I know this was brought up a long time ago in old threads, but were you guys able to figure out the defueling issue with theses ECMs? I have a 71mm turbo truck trying to fuel past factory but still falls of mm3 at 3150 rpm. I have pulled rpm limiters up to 4,000 rpm and tried 4,500rpm, but had no success.

  2. #2
    Member
    Join Date
    Oct 2012
    Posts
    52

    Default

    Manual or auto truck?

  3. #3
    Senior Member
    Join Date
    Aug 2019
    Posts
    142

    Default

    Manual truck right now, but also be doing to my auto soon.

  4. #4
    Member
    Join Date
    Aug 2014
    Posts
    83

    Default

    Same here, they added some more limiter tables a few months back but didn't seem to help any.

  5. #5
    Member
    Join Date
    Oct 2014
    Posts
    91

    Default

    They still don't have all the tables needed for this.

  6. #6
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Sorry guys but we won't be looking in to this any time soon. There is obviously a small market for higher RPM tunes but there is too many irons in the fire here at the moment to dedicate time to fringe situations.
    I no longer monitor the forum, please either post your question or create a support ticket.

Similar Threads

  1. CMC High RPM Fueling
    By comnrailpwr in forum Cummins 6.7L
    Replies: 100
    Last Post: September 15th, 2020, 04:41 AM
  2. High Rpm Miss 5.9
    By jumpman23302 in forum Cummins 5.9L
    Replies: 11
    Last Post: March 23rd, 2017, 01:08 PM
  3. High RPM upon startup
    By Naf in forum Gen III V8 Specific
    Replies: 3
    Last Post: January 29th, 2009, 06:38 PM
  4. RPM remains high after accel
    By madprof01 in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: March 26th, 2006, 01:55 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •