Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: $0020 DLL Error V8 & AutoCal V3

  1. #11
    Lifetime Member
    Join Date
    Nov 2005
    Posts
    1,753

    Default

    Trevor,

    Most common reasons are:

    1. Blank space pasted at the start/end of the code.
    2. FlashScan device used to generate the unlink code was different to the FlashScan device used to generate the link code.
    3. When the Tuner inputs the AutoCal V3 serial number they made a typo.

    You can check #1, but 2 and 3 are items your tuner needs to check. If you need to go that path, you should provide them with your serial number and license number so it's easy for them to check/correct. Follow these instructions to the first screen shot so you can copy/paste the info to eliminate typos https://service.efilive.com/kb/artic...licenses-slots

    You'll also find some information here on linking/unlinking here https://service.efilive.com/kb/artic...ocal-v3-unlink.

    Cheers
    Cindy

  2. #12
    New Member
    Join Date
    Sep 2020
    Posts
    8

    Default

    Thanks for that Cindy

    Upon closer inspection, the serial number on the back of the device is different than what shows in V8

    V8 has two leading 00's in front of the serial, where as the serial sticker on the back of the AutoCal has a 10 digit number sans leading 00's

  3. #13
    Lifetime Member
    Join Date
    Nov 2005
    Posts
    1,753

    Default

    Leading zeros won't have any impact with the software or the unlinking of the device.

  4. #14
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by cindy@efilive View Post
    Joe; this *should be* resolved in RC1. We found an old Win7 laptop we found in the storage room, was able to replicate the issue and fixed it. Can you please test and report via the beta process?
    . . .
    Ok, I'm going to try again...

  5. #15
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Ok, with RC1, FSV3 connect to Win7 without me needing to mess with the USB driver tool

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Replies: 3
    Last Post: October 29th, 2017, 12:06 PM
  2. midas.dll
    By Cbritt in forum Duramax LLY
    Replies: 2
    Last Post: June 12th, 2012, 11:49 AM
  3. Autocal Simple & Advanced Mode
    By av08 in forum AutoCal
    Replies: 3
    Last Post: July 2nd, 2011, 04:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •