Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 24

Thread: LS1B 1bar SD COS

  1. #11
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    I'm sorry, I have been swamped the last few days... give me a few days.

  2. #12
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Also, please post a log file.

  3. #13
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    A0014: follow the thread you read.

    Spark: post a log file.

  4. #14
    Junior Member
    Join Date
    Jun 2019
    Posts
    31

    Default

    Quote Originally Posted by joecar View Post
    A0014: follow the thread you read.

    Spark: post a log file.
    Here is a log of the pull second good log.efi

  5. #15
    Lifetime Member
    Join Date
    Aug 2013
    Posts
    735

    Default

    Why are you choosing to not run a MAF sensor?

  6. #16
    Junior Member
    Join Date
    Jun 2019
    Posts
    31

    Default

    Quote Originally Posted by statesman View Post
    Why are you choosing to not run a MAF sensor?
    The testing that I have done, shows that the MAF is starting to become a restriction. With MAF, the MAP is around 92-94kpa through a pull and without it its consistently around 97. The log attached earlier still has the MAF in place, only disconnected.

  7. #17
    Lifetime Member
    Join Date
    Aug 2013
    Posts
    735

    Default

    Are you Canadian?

  8. #18
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by hrspwr View Post
    The testing that I have done, shows that the MAF is starting to become a restriction. With MAF, the MAP is around 92-94kpa through a pull and without it its consistently around 97. The log attached earlier still has the MAF in place, only disconnected.
    Post a pic of your MAF plumbing...?

    What TQ and HP are you developing...?

  9. #19
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Hey statesman, how's it going, good I hope

  10. #20
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    ughhh... forum is truncating replies...

Page 2 of 3 FirstFirst 123 LastLast

Similar Threads

  1. COS question for LS1B
    By 2002_z28_six_speed in forum Custom Operating Systems
    Replies: 4
    Last Post: April 16th, 2020, 07:26 AM
  2. cos 5 on ls1b 411 n20 monitor not working
    By Age08 in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 6
    Last Post: May 27th, 2015, 09:44 AM
  3. Boost with a 1bar map sensor
    By franckrem in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 12
    Last Post: April 26th, 2010, 03:52 PM
  4. switched from COS 3 to COS 5 now reduced power mode
    By CRU SS N in forum Custom Operating Systems
    Replies: 1
    Last Post: April 26th, 2010, 03:48 PM
  5. Auto VE with 1Bar MAP and Boost?
    By Mort in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: October 8th, 2008, 03:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •